Table of Contents
Advertisement
The display darkens.
The image in the LCD
monitor will darken in
strong sunlight or bright
light.
Display flickers.
Display flickers when shot
under fluorescent lighting.
A bar of light (purplish red) appears on the LCD
monitor.
Sometimes appears when
shooting a bright subject,
such as the sun or other
light source.
appears.
A slow shutter speed has
likely been selected
because of insufficient
lighting.
This is a normal occurrence in devices
containing CCDs and does not
constitute a malfunction. This image
will not be recorded when shooting
still photos, but it will be recorded
when shooting movies.
This is not a camera malfunction
(flickering recorded in movies, but not
in still images).
This is a normal occurrence in devices
containing CCDs and does not
constitute a malfunction. This bar of
light will not be recorded when
shooting still photos, but it will be
recorded when shooting movies.
Setting the ND Filter on may reduce
this bar of light (p. 140).
Set the IS Mode to any setting other
than [Off] (p. 85).
Raise the ISO speed (p. 87).
Use the Auto ISO Shift (p. 88).
Set the flash to any setting other than
(flash off) (p. 73).
Set the self-timer and secure the
camera to something, such as a tripod
(p. 75).
If you have an externally mounted
flash, attach it (p. 265).
235
Advertisement
Table of Contents
