Self-Timer ' , 4'5 - Canon PowerShot A520 Quick Start Manual

Hide thumbs Also See for PowerShot A520:
Table of Contents

Advertisement

• The lower indicator will light yellow when the
shutter button is pressed halfway.
• Shooting procedures are the same as for the
tIDID
Mode (p. 33).
• Always use the LCD monitor to compose
images in macro mode. Shooting with the
viewfinder is possible, however, part of the
image may not appear in the actual shot
(p.35).
.
• When the lens is zoomed out to the Wide
angle end*1, the recordable area is approx.
60 x 44 mm (2.4 x 1.7 in.), and at telephoto
end*2, it is approx. 84 x 63 mm (3.3 x
2.5 in.).
When the zoom position is located between
the telephoto end and the wide angle end,
the distance between the front of the lens
and the subject will be the same as the
telephoto end.
• The exposure may not be optimal when the
flash is used in macro mode.
*1
Closest focal distance.
*2
Maximum optical telephoto setting.
Shooting - The Basics
I
Self-timer
• •.•
~
tIDIDPTv
AVM\\~~~E"SCNdJ·"
* The ~ cannot be set in ." and d;I modes.
1
Press the FUNC.
button and select
D*(Drive Mode)
using the. or •
button.
* The current setting is
displayed.
2
Select ~, ~ or ~ using the .. or
.. button and press the FUNC.
button.
• When
~
is selected, the shutter release will
be delayed for 10 seconds, and when
~
is
selected, the shutter release will be delayed for
2 seconds, after you press the shutter button
all the way.
45

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Powershot a510

Table of Contents