Using Self-Timer; Attaching The Cable Release - Canon EX AUTO Instructions Manual

Using Self· Timer
1
Wind the film advance lever.
2
Turn the self-timer lever counterclockwise until it stops.
3 Depress the shutter release button . The shutter will
be acturated approximately 10 seconds later.
• Be sure to wind ' the film advance lever. Otherwise,
the self-timer will act but the shutter will not be actuated.
Attaching the Cable Release
Separately avai iable Canon Release can be attached to the
EX AUTO by screwing it into the threaded hole in the center
of the shutter release button .
• Be sure to attach the cable release before winding up
the film advance lever. Otherwise, the shutter may be in-
advertently operated by screwing it into the socket.