Auto Exposure Bracketing (Aeb Mode) - Canon Powershot G10 IS User Manual

Auto Exposure Bracketing (AEB Mode)

In this mode, the camera automatically changes the exposure within a
set range to take three shots at the same interval as continuous
shooting (p. 111). The images are shot in the following order: Standard
exposure, underexposure and overexposure.
1
Select AEB.
1. Press the
2. Use the
and use the
select
3. Press the DISP. button.
2
Adjust the compensation
range.
1. Adjust the compensation range with
the or
2. Press the
• The compensation range can be set
as wide as 2 levels lower and 2 levels
higher, in 1/3 increments, than the
standard exposure value (the
compensated exposure value if exposure adjustment was
performed) at the center point. If exposure adjustment (p. 137)
is already done, setting can be done with the adjusted value as
the center point.
To Cancel the AEB Mode:
Select in Step 1.
The AEB mode is not available when shooting with the flash
on. Only one standard exposure image will be recorded.
Available Shooting Modes
button.
or button to select
or button to
.
button.
button.
139
p. 300
Standard
exposure
Compensation range