Advertisement
Advertisement
Table of Contents
Related Manuals for Yetter 2967-115A
Summary of Contents for Yetter 2967-115A
- Page 1 2967-115A RESIDUE MANAGER ATTACHMENT 2960 SERIES II UNIT MOUNTED CONSERVATION COULTER 2565-327_REV_I 08/2024 YETTER MANUFACTURING CO. FOUNDED 1930 Colchester, IL 62326-0358 Toll free: 800/447-5777 309/776-3222 (Fax) Website: www.yetterco.com E-mail: info@yetterco.com...
-
Page 2: Warranty
It is the user’s responsibility to deliver his machine to the Yetter dealer who sold him the product for service or replacement of defective parts, which are covered by the warranty policy. -
Page 3: Safety Precautions
SAFETY PRECAUTIONS A brief description of signal words that may be used in this manual: DANGER: Indicates an imminently hazardous situation which, if not avoided “will” result in death or serious injury. This signal word is to be limited to the most extreme situations. WARNING: Indicates a potentially hazardous situation which, if not avoided, “could”... -
Page 4: Operation Precautions
- MACHINE OPERATION NOTICE: failure to properly set the planter frame height and levelness can result in less than successful operation of the planter and the Yetter product and may result in damaged equipment. All operators should read and thoroughly understand the instructions given prior to using the Yetter product. - Page 5 PLANTER ADJUSTMENT...
-
Page 6: Installation
INSTALLATION Remove the upper ½” x 2 ½” bolt which attaches the unit coulter arm to the bracket through the slot. The two flat washers are no longer required. Save the lock nut for later use. CAUTION: DO NOT USE SPACER STRAP ON COMBO ARM W.A. AS A HANDLE, FINGERS MAY BE SERIOUSLY INJURED ON SHARP EDGE OF BLADE. - Page 7 PARTS IDENTIFICATION 2967-115A-ST-FW ITEM PART NO. DESCRIPTION 2502-369 ½-13 X 8 HHCS GRADE 5 2520-357 ½-13 LOCK NUT GRADE A 2520-465 5/8-11 FLANGE NUT GRADE 8 2527-340 ½ ID X 1-1/2 OD X 10 GAUGE MACHINE WASHER 2565-162 YETTER DECAL...
-
Page 8: Parts Identification
PARTS IDENTIFICATION 2966-140-ST-FW 2966-140-ST-PFW 2966-140-BW-FW... - Page 9 PARTS IDENTIFICATION 2966-141-FW 2966-140-STF-PFW RIGHT HAND SHARKTOOTH FINGER WHEEL ASSEMBLY...
- Page 11 ITEM PART NO DESCRIPTION 2502-221 5/16-18 X 1 HHFS GRADE 5 2502-222 5/16-18 X 1-1/4 HHFS GRADE 5 2502-225 5/16-18 X 1-1/2 HHFS GRADE 5 2940-560 SET SCREW 2965-500 HUB ASSEMBLY 1.406 SPINDLE 2965-501 HUB ASSEMBLY 2.406 SPINDLE 2965-502 HUB ASSEMBLY 1.157 SPINDLE ITEM PART NO DESCRIPTION...
- Page 12 2565-327_REV_I 08/2024...
Need help?
Do you have a question about the 2967-115A and is the answer not in the manual?
Questions and answers