Advanced Detection Systems 1200E Series Installation Manual And Owner's Manual page 4

Replaceable fuses as shown below. All are of the fast-acting type.
Note: When a fuse blows it is usually an indication of a short circuit.
The condition should be corrected before the new fuse is installed. ALWAYS
REPLACE BLOWN FUSES WITH A FUSE OF THE SAME CAPACITY.
Stability - Suitable stability is maintained under the following
conditions:
32-115o F (0-45o C)
0-90% humidity
+ 10% voltage variation
Sensitivity - Sensitivity varies with detector type, size, and product
being inspected.
application.
Main Power
Output Power
As a result, it is quoted separately for each
LI - Hot line 3 amp
L2 - Neutral line 3 amp
F1 - Hot line 3 amp
F2 - Neutral line 3 amp
1