Additional Features; Date/Time Set-Up; Performance Validation; Print/Report Functions - Advanced Detection Systems 1200E Series Installation Manual And Owner's Manual

ADDITIONAL FEATURES

DATE/TIME SET-UP

The metal detector has an internal "real-time" clock that keeps track of
the current date and time. It is set at the factory and normally would not
need to be adjusted. However, to compensate for different time zones and
for changes in Daylight Savings Time, etc. use menus 66, 72 & 73 to change
the detector's date and/or time.

PERFORMANCE VALIDATION

The metal detector can be set to stop all operations up to three times per
day and wait for a sensitivity test before resuming normal operations.
This will ensure that the detector is operating at the correct sensitivity
for quality control. The validation times can be set using menus 22-24 or
the feature can be turned off by using menu 21. A high level password is
required to access the performance validation feature.

PRINT/REPORT FUNCTIONS

An optional portable printer is available to print various reports. The
printer is plugged into a connector found on the metal detector control
cabinet. We suggest the use of the printer supplied by Advanced Detection
Systems. Other printers may not work correctly.
Using menus 12 & 13 two different reports are available:
Current product settings - This will print a list of the current
sensitivity, phase, range, etc., setting for each of the products in the
detector memory. The products printed are selectable using menu 14.
Event list - The metal detector will keep track of the last 100 "detect"
events. This list can be printed using menu 13. The list can be erased
after printing using menu 17 or directly using menu 16 & 17.

CONTRAST ADJUST

The contrast of the metal detector display can be adjusted by using menus
25 & 27. This is only true of the LCD type displays. The brighter vacuum
florescent displays are not adjustable.
16