Displaying The Data Code - Canon MVX4 Instruction Manual

Displaying the Data Code

The camcorder maintains a data code containing recording date and time and other
camera data such as shutter speed and exposure (f-stop).
DATA CODE button
MENU
( 63)
1. Set the camcorder to PLAY(VCR)•
2. Press the MENU button and select [DISPLAY SETUP/
3. Select [DATA CODE] and select the data code combination.
When playing back a memory card, you can only display the date and/or time.
4. Press the MENU button.
5. PLAY(VCR)•
button.
PLAY(VCR)•
Pressing the DATA CODE button again makes the data code disappear.
The data code will not display the next time you turn on the camcorder.
When the data code is being displayed, the level indicator will not display.
76
DISPLAY SETUP/
mode: Play back a tape and press the DATA CODE
mode: Press the DATA CODE button.
DATA CODE
or PLAY(VCR)• mode.
].