Step 1: Preparing The Power Supply - Canon MVX4 Instruction Manual

Step 1: Preparing the Power Supply

Preparation
The camcorder can be powered by a battery pack or connected to a household power
source. Charge the battery pack before use.
Attaching the Battery Pack
1. Turn the POWER switch to OFF.
2. Attach the battery pack to the
camcorder.
• Remove the terminal cover of the
battery pack.
• Slide in the connector end of the battery
in the direction of the arrow and press it
gently until it clicks.
To remove the battery pack:
Hold the BATT. RELEASE button
pressed down and pull out the
battery from the ridge on its bottom
part.
Charging the Battery Pack
1. Connect the power cord to the
adapter.
2. Plug the power cord into a power
outlet.
3. Open the terminal cover and
connect the power adapter to the
camcorder's DC IN terminal.
The charge indicator starts flashing. It
glows steadily when charging is complete.
To remove the power adapter:
1. Disconnect the power adapter
from the camcorder.
2. Unplug the power cord from the power outlet.
3. Disconnect the power cord from the adapter.
BATT. RELEASE
button
E
Charge
indicator
15