End Search - Canon MVX4 Instruction Manual

End Search

When you have played back a tape, you can use this function to locate the end of the last
recorded scene.
END SEARCH button
1. Set the camcorder to PLAY(VCR)•
2. Play back the tape.
3. In stop mode, press the END SEARCH button.
• "END SEARCH" appears.
• The camcorder rewinds/fast forwards the tape, plays back the last few seconds of
the recording and stops the tape.
• Pressing the button again cancels the search.
End search cannot be used once you unload the cassette.
If there are blank sections between recordings or sections recorded in different
formats on the same tape, the end search function may not work properly.
You cannot use end search to locate the editing end of audio dubbing.
mode.
E
77