Canon MVX4 Instruction Manual page 128

Memory Card Operation
Problem
Memory card cannot be
inserted.
Memory card cannot be
recorded.
Memory card cannot be
played back.
Image cannot be erased.
" " flashes red.
Printing
Problem
The printer is not operating
even though camcorder and
printer are correctly
connected.
Editing
Problem
Dubbing via the camcorder's
DV terminal does not work.
128
Memory card was not facing the correct direction. Turn the
memory card over and reinsert it.
Insert a memory card.
Memory card is full. Replace the memory card or erase
images.
Format the memory card.
Image number reached maximum value. Set [FILE NOS.] to
[RESET] and insert a new memory card.
SD Memory Card is protected. Change the position of the
protect switch.
Set the camcorder to PLAY(VCR)•
Insert a memory card.
Image is protected. Cancel the protection.
SD memory card is protected. Change the position of the
protect switch.
Card error occurred. Turn off the camcorder. Remove and
reinsert the memory card. Format the memory card if flashing
persists.
1. Set the camcorder to PLAY(VCR)•
2. Disconnect and reconnect the USB cable.
3. Turn off the printer and turn it back on.
Set [AV DV/ ] to [OFF].
Wrong signal format. Dubbing may work via the AV terminal.
Refer also to the instruction manual of the connected device.
Solution
mode.
Solution
mode.
Solution
19
19
94
95
68
19
35
19
93
19
95
–
65
–