Displaying The Data Code - Canon ZR600 Instruction Manual

Displaying the Data Code
The camcorder maintains a data code containing the recording date and time. You can
select th~ data code combination and display it during playback.
Joystick
62
I
~~~)
I
rE;lI~~
DISPLAY SETUP!@
I~I
DATA CODE DATE & TIME
1. Open the FUNC. menu, select ("T) the
rE;l
icon and press (00).
2. Select ("T) the [DISPLAY SETUP/@] menu and press (@). Then,
select ("T) the [DATA CODE] option and press (00).
3. Select a setting option and press (00 ) to save the changes, then close
the menu.
4. To display the data code during playback: Press the DATA CODE
button.
_ The data code will not display the next time you turn on the camcorder.
•
Date and time appear for 6 seconds when you begin playback, or to indicate that date or
time zone has changed.
I
~~~
I
rE;lI~~
DISPLAY SETUP!@
H
6SEC.DATE OFF
1. Open the FUNC. menu, select ("T) the
rE;l
icon and press (00).
2. Select ("T) the [DISPLAY SETUP/@] menu and press (@). Then,
select (.. T) the [6SEC.DATE] option and press (@).
3. Select a setting option and press
(@ )
to save the changes, then close
the menu.