Brother ULT-2003D Operation Manual page 219

5-44
4. Use
the desired 4-digit number.
If you made a mistake, press
number, and then enter the correct number.
1 Name of the selected thread color
2 Shows the entered number.
3 Press to erase the entered number.
1
2
3
5. Press
* If
will not be changed.
1 Press to apply the entered number to the selected
color.
6. Repeat steps 3 through 5 until all desired thread color
numbers are specified. To change a specified thread
color number, perform the steps described above to
enter the new number.
7. When you are finished creating the custom thread num-
bering set, press
* With thread colors where a number has not been speci-
fied, "----" appears for the thread color display.
1
Embroidery
to erase the entered
.
is not pressed, the thread color number
.
1 —
to enter
2 —
3 —
4 —
5 —
6 —
7 —
8 —
9 —