I Overcasting Using The Side Cutter - Brother ULT-2003D Operation Manual

I Overcasting Using the Side Cutter

By using the side cutter, you can do overcasting while cutting the fabrics.
1
2
1. Push the "Needle Position" button to raise the needle,
then turn off the power.
2. Raise the presser foot lever.
2
3. Press the black button on the presser foot holder, and
remove the presser foot.
4. Set the fork of the operating lever around the needle
clamp screw.
5
1 Needle clamp screw
2 Operating lever
1
* Make sure that the fork of the operating lever is set
onto the screw firmly.
Sewing Utility Stitches
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
9 —
3-25