Basic Embroidery - Brother ULT-2003D Operation Manual

BASIC EMBROIDERY

Attach the presser foot, embroidery unit, and follow the other steps below to prepare the machine
for embroidery.
Step 12
Step 2, 3
Step 10
Step 7, 8
Step #
1 Turn off the power.
2 Install sewing machine needle 75/11.
3 Attach embroidery foot "Q".
4 Attach the embroidery unit.
5 Turn on the power.
6 Select an embroidery design.
7 Attach a stabilizer material to the fabric.
8 Place the fabric in the embroidery frame.
9 Place the bobbin, into bobbin case.
10 Attach the embroidery frame to embroidery unit.
11 Thread the machine.
12 Lower the presser foot and start embroidering.
Step 4
Step 9
Action
Embroidery
Step 11
Page
1-12
1-43
5-4
5-5
1-12
5-8
5-20
5-21
1-31
5-24
1-32
5-30
1 —
2 —
3 —
Step 6
4 —
5 —
6 —
Step 1, 5
7 —
8 —
9 —
5-3