Chapter 7 My Custom Stitch; Designing The Stitch - Brother ULT-2003D Operation Manual

Chapter 7 MY CUSTOM STITCH

DESIGNING THE STITCH

3
2
With the MY CUSTOM STITCH
sew designs that you create yourself.
Note
• Stitches that you create with MY CUSTOM
1
• Stitches can be designed more easily with MY
1. Draw the stitch design on the grid sheet (part code
Note
• Simplify the design so that it can be sewn as a
• If the design will be repeated and linked, the start
2. Mark the points in the design where the direc-
3. Determine the x and y coordinates of each of
My Custom Stitch
STITCH can be a maximum of 7 mm (9/32 inch)
TM
wide and 37 mm (1-1/3 inch) long.
CUSTOM STITCH if you draw the stitch on the
TM
enclosed grid sheet first.
SA507, X81277-001).
1 Start point
2 End point
3 Intersection
continuous line. For a more attractive stitch,
close the design by intersecting lines.
point and end point of the design should be at
the same height.
tion of the stitching changes.
the marked points. This will determine the de-
sign of the stitching that will be sewn.
function, you can
TM
7-1
1 —
2 —
3 —
4 —
5 —
7
6 —
7 —
8 —
9 —