Brother ULT-2003D Operation Manual page 90

6
6
1
6
2. Attach presser foot "J". Hold the thread tails and fabric
with your left hand, and turn the balance wheel with
your right hand to insert the needle into the fabric. This
is the sewing start position.
3. Lower the presser foot, and hold the "Reverse/Reinforce-
5 ment Stitch" button to sew 3-4 stitches. After the ma-
chine sews reverse stitches (or reinforcement stitches),
press the "Start/Stop" button to sew forward. The ma-
chine will begin sewing slowly.
1 3 - 4 reverse stitches
CAUTION
Be sure the needle does not strike a basting pin,
or any other objects, during sewing. The thread
could tangle or the needle could break, causing
injury.
4. When sewing is completed, hold the "Reverse/Rein-
forcement Stitch" button to sew 3-4 reverse stitches (or
reinforcement stitches) at the end of seam.
5. After sewing, press the "Thread Cutter" button to trim
the threads.
* When the automatic thread cutting and automatic re-
inforcement stitch keys on the screen are selected, re-
verse stitches (or reinforcement stitches) will be sewn
automatically at the start of sewing when pressing the
"Start/Stop" button. Press the "Reverse/Reinforcement
Stitch" button to sew reverse stitches (or reinforcement
stitches) and trim the thread automatically at the finish
of sewing.
Sewing Utility Stitches
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
9 —
3-17