Error Messages; Warning Messages - Brother PC-8500 Operation Manual

ERROR MESSAGES

If the machine is not properly set and the "START/STOP" button is pressed, or a correction of your
operating procedure is required, the machine will not start and it will instruct you with an alarm and warning
message on the LCD.

Warning messages

This message is displayed if motor is locked.
This message is displayed when the machine finds that the
upper thread is cut.
This message is displayed when the embroidery unit is trying to
initialize while the embroidery foot is lowered.
This message is displayed when the "START/STOP" or
"AUTOMATIC THREAD CUTTER" button is pressed while the
presser foot or embroidery foot is raised.
This message is displayed if the "CARD" key is touched while
there is no memory card inserted into the slot.
173