Attaching Buttons With Four Holes; Attaching A Shank To The Button - Brother PC-8500 Operation Manual

Attaching buttons with four holes

Attaching a shank to the button

6
1
First sew the two holes which are closest to you. Once they
have been sewn, raise the presser foot, move the needle to the
next two holes and then sew them in the same way.
1. Pull the shank lever toward you and then start sewing.
1 Shank lever
2. Hold the upper thread ends at the sewing start and sewing
end which are between the button and the fabric, wind them
around the shank and then tie them firmly together.
3. Tie the ends of the bobbin thread together at the reverse
side of the fabric.
65