For Reinforcement Stretching On Stretch Fabric; Changing The Stitch Length; Changing The Needle Position - Brother PC-8500 Operation Manual

For reinforcement stitching on stretch fabric

Changing the stitch length

3 2

Changing the needle position

1 2
46
3
Baste the fabric beforehand and sew along to the basting using
a stretch stitch.
5
* Do not pull the fabric during sewing.
1 Basting
1
Touch the "
the stitch length.
1 Longer
1
2 Original length: 2.5 mm (1")
3 Shorter
* For thin material which is less than 1 mm (1/16"), the stitch
length will be set to 4.0 mm (3/16") automatically during
sewing even if you set the length to 5.0 mm (3/16").
Touch the "
the needle position.
1 Left needle position: 0 mm (0")
3
2 Center needle position: 3.5 mm (1/8")
3 Right needle position: 7.0 mm (1/4")
* The needle position cannot be changed for the straight
stitch/center position selection "
" and " " stitch length setting keys to adjust
" and " " stitch width setting keys to adjust
".