Basting - Brother PC-8500 Operation Manual

BASTING

66
1. Attach presser foot "J". It is suggested that the basting stitch
be started with a reinforcement stitch by pressing the
"REVERSE STITCH" button.
Note
If you do not want to use a reinforcement stitch at the
beginning, you should lift the presser foot, rotate the hand
wheel, pull up the bobbin thread and pull a length of top and
bobbin thread out from the rear of the machine.
* You can change the length of one stitch to between 5 mm
and 30 mm (3/16" to 1-3/16").
1 5 mm to 30 mm (3/16" to 1-3/16")
2. Sew while keeping the fabric taut.
3. End sewing with a reinforcement stitch.
J
1