Changing The Size Of Characters, Frame Patterns And Pattern - Brother PC-8500 Operation Manual

Changing the size of characters, frame patterns and pattern

You can change the size of character and frame patterns to any size you wish.
[When changing character size]
1. Touch the "SIZE" key.
2. To increase the pattern size, touch the "
reduce the size, touch the "
touch the " " key.
The size will change each time one of these keys is
pressed.
* The maximum frame pattern size is different for each
pattern.
* Some frame patterns can be enlarged further if they are
rotated 90°.
3. After adjustment is competed, touch the "END SIZE
CHANGE" key.
CAUTION
After the size of a character, frame patterns or embroidery
patterns have been changed, check the display to see
which embroidery frames can be used. If an embroidery
frame which is not displayed is used, the embroidery foot
may touch the frame, or injury may result.
" key; to
" key to reset the size
127