Upgrading Your Machine's Software; Upgrade Procedure Using Usb Media; Upgrade Procedure Using Computer - Brother Innov-is 4000DLTD User Manual

UPGRADING YOUR MACHINE'S SOFTWARE

UPGRADING YOUR MACHINE'S SOFTWARE

You can use USB media or a computer to download software upgrades for your sewing machine.
Memo
During the process of upgrading software, the buzzer will not sound when a key is pressed.
Upgrade Procedure Using USB
Media
a
While pressing the "Automatic Threading"
button, turn the main power to ON.
→ The following screen will appear on the LCD.
b
Press
c
Insert the USB media into the USB port
connector on the machine, making sure the
media only contains the upgrade file.
d
Press
→ The upgrade file is downloaded.
Note
If an error occurs, a red text error message will
appear. If the download is performed success-
fully, an "Upgrade complete." message will
appear.
224
.
.
e
Remove the USB media, and turn the
machine off and on again.
Upgrade Procedure Using
Computer
a
While pressing the "Automatic Threading"
button, turn the main power to ON.
→ The following screen will appear on the LCD.
b
Press .
c
Plug the USB cable connector into the
corresponding USB port connectors for the
computer and for the machine.
→ "Removable Disk" will appear in "My Computer".
d
Copy the upgrade file to "Removable Disk".
→ The "Connected to PC. Do not disconnect the USB
cable." message will appear.