Brother Innov-is 4000DLTD User Manual page 230

This message is displayed when
the machine is in embroidery
mode and the small frame is
attached, and the selected
pattern does not fit in the small
frame.
This message is displayed when,
with the machine in embroidery
mode and the small embroidery
frame or medium embroidery
frame attached, the selected
pattern is larger than the
embroidery area of the medium
embroidery frame.
This message is displayed when,
with the machine in embroidery
mode and the small embroidery
frame, medium embroidery
frame or large embroidery frame
attached, the selected pattern is
larger than the embroidery area
of the large embroidery frame.
This message is displayed when
the machine is in embroidery
mode and the embroidery unit
tries to initialize while the
embroidery frame is attached.
This message is displayed when
the machine is ready to sew an
embroidery pattern, and the
"Start/Stop" button is pushed
while the embroidery frame is
not attached.
ERROR MESSAGES
This message is displayed when
the bobbin is being wound, and
the motor locks because the
thread is tangled, etc.
This message is displayed when
the bobbin thread is running out.
This message is displayed when
the embroidery unit is initializing.
This message is displayed when
the memory is full and the stitch
or pattern cannot be saved.
This message is displayed when
the machine is retrieving a
previously saved pattern while in
embroidery edit mode.
8
219