Changing The Presser Foot; Removing The Presser Foot; Attaching The Presser Foot - Brother Innov-is 4000DLTD User Manual

CHANGING THE PRESSER FOOT

CHANGING THE PRESSER FOOT

• Always press
"Start/Stop" button or another button is pressed, the machine will start and may cause injury.
• Always use the correct presser foot for the selected stitch pattern. If the wrong presser foot is used, the
needle may strike the presser foot and bend or break, and may cause injury.
• Only use presser feet made for this machine. Using other presser feet may lead to accident or injury.

Removing the Presser Foot

a
Press the "Needle Position" button to raise
the needle.
b
Press
→ The key appears as
c
Raise the presser foot lever.
d
Press the black button on the presser foot
holder and remove the presser foot.
a
a Black button
b Presser foot holder
32
on the screen before changing the presser foot. If
.
.
b
CAUTION

Attaching the Presser Foot

a
Place the new presser foot under the
holder, aligning the foot pin with the notch
in the holder. Lower the presser foot lever
so that the presser foot pin snaps into the
notch in the holder.
a Notch
b Pin
b
Press
buttons.
c
Raise the presser foot lever.
is not pressed and the
a
b
to unlock all keys and