Adjustment Of Time - Daewoo DLT-26C2, DLT-26C3, DLT-32C1, DLT-32C2, DLT-32C3, DLT-37C3 Instruction Manual

Daewoo electronics instruction manual lcd television dlt-26c2, dlt-26c3, dlt-32c1, dlt-32c2, dlt-32c3, dlt-37c3

Hide thumbs Also See for DLT-26C2, DLT-26C3, DLT-32C1, DLT-32C2, DLT-32C3, DLT-37C3:

Service manual (108 pages)

Instruction manual (56 pages)

Instruction manual (53 pages)

Table Of Contents

Table of Contents

1. Setting the Clock.

• Move to Timer in the Utilities menu.

• To go to the Time, press the "RIGHT " button.

• Place the cursor to Hour / Minute with " LEFT/RIGHT " buttons.

• Set the Hour / Minute with the " UP/DOWN " buttons.

• Press the Menu button to initialize Time.

Note :

• The Time is clear when you turn the AC off, but if you select a pro-

gram of your country which has Teletext or PDC transmission, the

clock will be set and corrected automatically.

2. Setting the Wake up time / Program / Volume.

• Move to Timer in the Utilities menu.

• To go to the Wake Up, press the " UP/DOWN " buttons.

• Select the Wake Up to "On" .

• Set On Timer, Program and Volume in a same way to the above

for the Clock. The set will be turned on at selected time.

Note :

• Conﬁrm the Time is set. The Wake up time is only available when the

Time is set.

• If adjusted once, the On Timer continues to operate everyday unless

canceling setup or turn the AC power off.

• It is a convenient method to wake you up in the morning

3. Set up of Off Time.

• By pressing the SLEEP button on the remote controller repeatedly,

you can select one of the following settings:

Sleep Timer: Off => 15 => 30 => 60 => 90 => 120 => Off

• The set will turn off after the time you select.

Note :

• If an active signal is not present for about 30 minutes, the set will au-

tomatically turn to Stand-by mode.

Utilities