Brother MFC-465CN User Manual page 62

Chapter 7
Note
Ring Pattern #1 is often called short-short
and is the most commonly used.
If the ring pattern you received is not on
this chart, please call your telephone
company and ask for one that is
shown.
The machine will only answer calls to its
registered number.
The first two rings are silent on the
machine. This is because the fax must
'listen' to the ring pattern (to compare it to
the pattern that was 'registered'). (Other
telephones on the same line will ring.)
If you program the machine properly, it will
recognize the registered ring pattern of the
'fax number' within 2 ring patterns and
then answer with a fax tone. When the
'voice number' is called, the machine will
not answer.
Registering the Distinctive Ring
pattern
After you have set the Distinctive Ring feature
to on, the receive mode is set to Manual
automatically. You cannot change the receive
mode to another mode while the Distinctive
Ring is set to on.
a
Press Menu.
b
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose
Miscellaneous.
Press OK.
d
Press a or b to choose Distinctive.
Press OK.
e
Press a or b to choose Set.
Press OK.
46
f
Press a or b to choose the stored ring
pattern you want to use.
Press OK.
(You hear each pattern as you scroll
through the four patterns. Make sure
you choose the pattern that the
telephone company gave you.)
g
Press Stop/Exit.
Distinctive Ring is now set to on.
Turning off Distinctive Ring
a
Press Menu.
b
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose
Miscellaneous.
Press OK.
d
Press a or b to choose Distinctive.
Press OK.
e
Press a or b to choose Off.
Press OK.
7
f
Press Stop/Exit.
Note
If you turn off Distinctive Ring, the
machine will stay in Manual receive
mode. You will need to set the Receive
Mode again. (See Choosing the Receive
Mode on page 38.)
7