Entering Photocapture Mode; Print Images; View Photo(S) - Brother MFC-465CN User Manual

PhotoCapture Center

Entering PhotoCapture mode

After you insert the memory card or USB
Flash memory drive, press the
(PhotoCapture) key to illuminate it in
green and display the PhotoCapture options
on the LCD.
The LCD shows:
PHOTO

View Photo(s)

Print Index
Print Photos
Photo Effects
Select & Press
Press a or b to scroll through the
PhotoCapture key options.
View Photo(s) (See page 85.)
Print Index (See page 86.)
Print Photos (See page 86.)
Photo Effects (See page 87.)
Search by Date (See page 90.)
Print All Photos (See page 90.)
Slide show (See page 90.)
Trimming (See page 91.)
Note
If your digital camera supports DPOF
printing, see DPOF printing on page 91.
When the option you want is highlighted,
press OK.
®
: Printing photos from a memory card or USB Flash memory drive
13
OK

Print Images

View Photo(s)
You can preview your photos on the LCD
before you print them. If your photos are large
files there may be a delay before each photo
is displayed on the LCD.
a
Make sure you have put a memory card
or USB Flash memory drive in the
proper slot.
Press (PhotoCapture).
b
Press a or b to choose
View Photo(s).
Press OK.
c
Press d or c to choose your photo.
Note
Instead of scrolling through your photos,
you can use the dial pad to enter the
number of the image from the index page.
(See Print Index (Thumbnails)
on page 86.)
d
Press a or b to increase or decrease the
number of copies.
e
Repeat step c and step d until you
have chosen all the photos.
Note
Press Clear/Back to go back to the
previous level.
f
After you have chosen all the photos, do
one of the following:
Press OK and change the print
settings. (See page 92.)
If you do not want to change any
settings, press Color Start to print.
13
13
13
85