Brother MFC-465CN User Manual page 105

PhotoCapture Center
d
Press a or b to choose
Remove Red-Eye.
Press OK.
When Remove Red-Eye is
successful, the photo after effect is
shown. The adjusted part is shown in
a red frame.
When Remove Red-Eye is
unsuccessful,
Unable to Detect. is shown.
Press OK to go back to the previous
level.
Note
Press # to try Remove Red-Eye once
again.
e
Press a or b to increase or decrease the
number of copies.
f
Do one of the following.
Press OK and change the print
settings. (See page 92.)
If you do not want to change any
settings, press Color Start to print.
Monochrome
You can convert your photo to black & white.
a
Make sure you have put a memory card
or USB Flash memory drive in the
proper slot.
Press (PhotoCapture).
b
Press a or b to choose
Photo Effects.
Press OK.
c
Press d or c to choose your photo.
Press OK.
d
Press a or b to choose Monochrome.
Press OK.
e
Press a or b to increase or decrease the
number of copies.
®
: Printing photos from a memory card or USB Flash memory drive
f
Sepia
You can convert the color of your photo to
sepia.
a
b
c
d
e
f
13
Do one of the following.
Press OK and change the print
settings. (See page 92.)
If you do not want to change any
settings, press Color Start to print.
Make sure you have put a memory card
or USB Flash memory drive in the
proper slot.
Press (PhotoCapture).
Press a or b to choose
Photo Effects.
Press OK.
Press d or c to choose your photo.
Press OK.
Press a or b to choose Sepia.
Press OK.
Press a or b to increase or decrease the
number of copies.
Do one of the following.
Press OK and change the print
settings. (See page 92.)
If you do not want to change any
settings, press Color Start to print.
13
13
89