Brother MFC-465CN User Manual page 145

c
Reset the machine by lifting the scanner
cover from the front of the machine and
then closing it.
If you cannot remove the jammed
paper from the front of the machine,
or the error message still appears on
the LCD after you have removed the
jammed paper, please go to the next
step.
d
Remove the Jam Clear Cover (1) from
the back of the machine. Pull the
jammed paper out of the machine.
CAUTION
DO NOT place the jam clear cover face
down as shown in the illustration. You may
damage the cover and cause paper jams.
Troubleshooting and Routine Maintenance
e
f
1
If the paper is jammed under the print
head, unplug the machine from the power
source, and then move the print head to
take out the paper.
Put the Jam Clear Cover back on.
Make sure the cover is set properly.
Using both hands, use the plastic tabs
on both sides of the machine to lift the
scanner cover (1) until it locks securely
into the open position.
Make sure that there is no jammed
paper left in the corners of the machine.
1
Note
B
129