Subscribe to Our Youtube Channel
Related Manuals for DivioTec NDS286PRO
Summary of Contents for DivioTec NDS286PRO
- Page 1 DivioTec, Ltd. Intelligent Digital Security 2MP/8MP Speed Dome 35X Optical Zoom, Support OIS, With IR and Sunshield NDS286PRO / NDS295PRO / NDS296 User Manual DivioTec, Ltd. www.diviotec.com.tw Published November 2023...
-
Page 2: Table Of Contents
Accessing the Camera’s Configuration Menu (Graphical User Interface) 10 Network - FTP ................42 Installing IP-FINDER Software ..............10 Network - SSL ................43 IP-FINDER ................. 13 Network - 802.1x ................ 44 NDS286PRO / NDS295PRO / NDS296 User Manual Copyright © 2023 DivioTec All Rights Reserved. - Page 3 Event - Network Storage .............. 66 Event - Relay Handler ............... 68 Event - SD Record Handler ............69 Event - Playback ..............73 Event - TCP Notify ................ 74 NDS286PRO / NDS295PRO / NDS296 User Manual Copyright © 2023 DivioTec All Rights Reserved.
-
Page 4: Preface
▪ Follow all warnings and cautions in this manual. any form or by any means without the prior written consent from DivioTec, ▪ Do not place the unit on an unstable surface, cart, or stand. -
Page 5: Rohs Compliance
(Cr6+) < 0.1% or 1,000ppm, Polybrominated biphenyls (PBB) < 0.1% or 1,000ppm, and Polybrominated diphenyl Ethers (PBDE) < 0.1% or 1,000ppm. In order to meet the RoHS compliant directives, DivioTec has established an engineering and manufacturing task force to implement the introduction of green products. -
Page 6: Installation Recommendations
2. Maintenance: to keep the unit clean, use only approved cleaning products or clean with a dry cloth. NDS286PRO / NDS295PRO / NDS296 User Manual Copyright © 2023 DivioTec All Rights Reserved. -
Page 7: Conventions Used In This Manual
This will prevent injury to yourself when performing a task. Caution: Information to avoid damaging components or losing data. Note: Provides additional information to complete a task easily. NDS286PRO / NDS295PRO / NDS296 User Manual Copyright © 2023 DivioTec All Rights Reserved. viii... -
Page 8: Package Contents
Preface Package Contents The NDS286PRO/NDS295PRO/NDS296 package contain the following accessories: Name Quantity IP camera Stainless Steel Screw Quick Installation Guide The camera accessory bag doesn't include the safety rope. Please prepare a safety rope when installing for safety purpose. Refer to the illustration below for the location of the safety rope hole. -
Page 9: Chapter 1: Product Introduction
▪ Image Stabilization: OIS ▪ Defog (Optical): Support ▪ Speed Dry: Support ▪ De-icing: Optional ▪ Analytics: Object Tracking; Optional by OEM/ODM request (Deep Learning Engine built-in) NDS286PRO / NDS295PRO / NDS296 User Manual Copyright © 2023 DivioTec All Rights Reserved. - Page 10 ▪ Onvif: Profile S, G, T ▪ Dimension: 250*362mm*(ø)190 mm ▪ NWT: 5kg ▪ Full Carton: 2 pcs ▪ Certification (compliant): CE/FCC, UL is optional request by OEM/ODM NDS286PRO / NDS295PRO / NDS296 User Manual Copyright © 2023 DivioTec All Rights Reserved.
-
Page 11: Important Guidelines For Camera Power Adapter Usage
Please note that these methods can help resolve voltage drop issues caused power adapter may vary depending on the region of shipment. by longdistance cables, ensuring proper camera operation. NDS286PRO / NDS295PRO / NDS296 User Manual Copyright © 2023 DivioTec All Rights Reserved. -
Page 12: Dimensions
Chapter 1: Product Introduction Dimensions NDS286PRO / NDS295PRO / NDS296 User Manual Copyright © 2023 DivioTec All Rights Reserved. -
Page 13: Di/O & Function Description
SD Card Slot AC 24V INPUT LINE OUT+ Reset Button ALARM IN- LINE IN- Power Switch ALARM IN+ LINE IN+ ALARM OUT- RJ45 PoE LAN Port ALARM OUT+ NDS286PRO / NDS295PRO / NDS296 User Manual Copyright © 2023 DivioTec All Rights Reserved. -
Page 14: Wall Mount Bracket Assembly
The safety wire has 2 hooks at both sides. Hook the safety wire(A) on the wall mount and pull the cable through the wall mount and fasten screws to secure the wall mount on the wall. NDS286PRO / NDS295PRO / NDS296 User Manual Copyright © 2023 DivioTec All Rights Reserved. - Page 15 Hook the safety wire on (D). Please connect the cable with terminal Combine camera and wall mount together (align (E) with (F)). block and plug-in the corresponded holes and RJ45 connector. NDS286PRO / NDS295PRO / NDS296 User Manual Copyright © 2023 DivioTec All Rights Reserved.
- Page 16 It is the wrong installation for reference. Please DO NOT let the lens face angle over the A line. SD Card The lens should face down NDS286PRO / NDS295PRO / NDS296 User Manual Copyright © 2023 DivioTec All Rights Reserved.
-
Page 17: Pendant Mounting
(the hole of tube). Tighten the hexagonal screw(A) with proper tool. 1. Fasten stainless steel anchors x3. 2. Pull the safety wire and cables through the bottom case of pendant mount and tighten the screws. NDS286PRO / NDS295PRO / NDS296 User Manual Copyright © 2023 DivioTec All Rights Reserved. - Page 18 Hook the safety wire(C) on the camera. Please connect the cable with Combine the camera and wall mount together (align (D) with (E)). terminal block and plug-in the corresponded holes and RJ45 connector. NDS286PRO / NDS295PRO / NDS296 User Manual Copyright © 2023 DivioTec All Rights Reserved.
- Page 19 It is the wrong installation for reference. Please DO NOT let the lens face angle over the A line. SD Card The lens should face down NDS286PRO / NDS295PRO / NDS296 User Manual Copyright © 2023 DivioTec All Rights Reserved.
- Page 20 Chapter 1: Product Introduction DO NOT install the product on unstable poles, brackets, surfaces or walls. NDS286PRO / NDS295PRO / NDS296 User Manual Copyright © 2023 DivioTec All Rights Reserved.
-
Page 21: Chapter 2: Camera Configuration
You can access the camera via a web browser or IP-FINDER software. The program. following information outlines the instructions for each method. 4. Click the Next button on the welcome screen to continue. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... - Page 22 Cost button, a pop-up window will appear on the screen to show the disk information. User accounts 5.3 Specify which user accounts on the computer can access the program, the options are Everyone and Just me. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual...
- Page 23 6. Click on Next button to begin installation. 7. Once the installation process is completed, click on Close button to finish. A shortcut will be created on the desktop. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual...
-
Page 24: Ip-Finder
Camera List. A browser will be opened automatically. Camera List The cameras displayed in the Camera list are based on the camera that you have connected. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 25: Introduction To The Ip-Finder User Interface
Mark”. Users can also click the column headers to sort the list. Asterisk sign indicates that this device has “Preview”, “Assign Device Mark IP” and, “Firmware Upgrade” functions. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 26: Web Browser
Enter button. You will be prompted with a pop-up window asking for login information, type in “admin” (default login name) and “9999” (default password). Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 27: Main Screen Overview
Video Format: Set the video format, the available options are H.264 and MJPEG • PTZ Control: Select this option to manually control the PTZ. Snapshot Capture the current image. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... - Page 28 Chapter 2: Camera Configuration Pause Pause the image. Speed Dry Activate the function of speed dry. Maximizing the Window Click to go full screen. 9 10 11 Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual...
-
Page 29: Configuring The Camera's Setting
Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 30: Video - Video Configuration
The numeric values that can be entered from 1~255 to configure max dynamic GOP. Bit Rate Configure the bit rate, the range is 500~12000. Users can enter the value or adjust it through the slider bar. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... - Page 31 The numeric values that can be entered from 1~255 to configure max dynamic GOP. Bit Rate Configure the bit rate, the range is 64~4000. Users can enter a value or adjust it through the slider bar. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual...
- Page 32 0 is selected. Save Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual...
-
Page 33: Video - Audio Configuration
High, Mid, and Low. Save Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 34: Image - Exposure
The range is 1/7~1/16000. It is available for editing when Lock is selected in the Mode. Gain Control The available options are OFF, High, Medium, and Low. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... - Page 35 The available options are OFF and Noise Reduction Enable this function to reduce noise. The available options are OFF, High, Medium, and Low. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual...
- Page 36 IR Cut ControlTele IR Mode The available options are Adaptive and Manual. IR Cut Control The available options are Auto, Sync Day Night, Force Day, and Force Night. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual...
-
Page 37: Image - Basic Settings
Configure the sharpness of the image, the range is 0~255, with 0 being the lowest sharpness. Enter a value or adjust the bar to increase or decrease the value. The default value is 127. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 38: Image - Roi
Click the Set Area button for the setting to take effect. The ROI area will then be seen on the video stream. Click the Del Area button or select OFF (step 1) to delete the ROI area. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 39: Image - Osd
+ date/time, preset, or direction. Save Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 40: Ptz - Manual
Save button to apply the configurations, click on this button once all the Pan Left Limit settings are confirmed for the new changes to take effect. Click the Set button to configure pan left limit. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 41: Ptz - Preset
(1~256) then click Delete to remove the preset. Preset go(1~256) The preset will show in the drop-down menu, select preset and click Run to operate. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 42: Ptz - Cruise
Click the Set button to start record. Record End Click the Set button to end record. Cruise Run Select the cruise and click the Run to operate. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 43: Ptz - Auto Pan
Select the auto pan from 1~4, then click Run to operate. Save Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 44: Ptz - Sequence
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Sequence Run Configure a sequence run from 1~8, then click the Run button to operate. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 45: Ptz - Home Function
Available options are 1~256. Save Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 46: Ptz - Tilt Range
Type a maximum tilt angle in 80~90 degree. The default is 90 degree. Save Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 47: Ptz - Privacy Zone
Click Set Area button when all options are confirmed. To remove the mask, choose the mask number and click Del Area button. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 48: Ptz - Ptz Setting
Click the Set button to position the East. Save Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 49: Ptz - Track
Click Run button to start tracking. Save Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 50: Ptz - Schedule
Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 51: Network - Basic
There are 3 modes to be selected: Stateless, Stateless DHCP, and Stateful DHCP, enable IPv6 Auto then the address prefix won’t be able to be inputted. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... - Page 52 Configure the web URL address. Save Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual...
-
Page 53: Network - Ftp
1~10. Save Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 54: Network - Ssl
Press Next after selecting the installation method. Save Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 55: Network - 802.1X
Save Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 56: Network - Snmp
Save button to apply the configurations, click on this button once all the Download MIB settings are confirmed for the new changes to take effect. Download MIB file for SNMP. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 57: Network - Firewall
A total of 8 IP addresses can be added to the list. Save Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 58: Network - Ldap
Save Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 59: Network - Ddns
Type the same password again for confirmation. Save Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 60: Network - Rtsp
Default URL Path of Stream 1 to Stream 3 Stream 1: rtsp://cameraIP/stream1 Stream 2: rtsp://cameraIP/stream2 Stream 3: rtsp://cameraIP/stream3 Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... - Page 61 Save button to apply the configurations, click on this button once all the Configure the time-to-live threshold of the multicast datagram before it settings are confirmed for the new changes to take effect. is discarded by the router. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual...
-
Page 62: Network - Bonjour / Upnp
Places to allow for direct access. Save Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 63: System - Date / Time
ONVIF Time Zone settings are confirmed for the new changes to take effect. Configure it to the time zone of the ONVIF device date and time. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 64: System - Maintenance
Click this button to restore all the camera’s setting back to factory default except IP address (keeps all the settings on the Network Basic setting page). Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... - Page 65 Switching the video system type will cause the camera to restart and reset to default. Focus D/N Auto Focus Calibration Enable Day & Night focus calibration. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual...
-
Page 66: System - User Management
Information. Press Give Up to delete the new user if you do not want to set up continually. To delete an account, press the Delete User button. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... - Page 67 Retype the same password to confirm. Save Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual...
-
Page 68: System - Homepage Layout
PNG, it will be resized to 240x40 pixel to replace the previous logo. Save Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 69: Event - Alarm Handler
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Close Press to exit the schedule setting page. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 70: Event - Motion Detection
1. Repeat the above steps to create motion areas for zones 2 to 5 if necessary. To delete an area, find the motion zone number you would like to remove, and press the Del Area button. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... - Page 71 Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Close Press to exit the schedule setting page. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual...
-
Page 72: Event - Tampering Alarm
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Close Press to exit the schedule setting page. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 73: Event - Network Loss Detection
Enable or disable the network loss detection function. Save Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 74: Event - Ftp Upload
Select Sub Folder or Single Folder. Save Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 75: Event - Smtp
Subject Specify the subject of the message. Message Specify the message content. Attach JPEG Snapshot Enable or disable e-mail delivery of trigger event snapshots. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... - Page 76 Save Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual...
-
Page 77: Event - Network Storage
Specify the IP address of the network storage server. Share Specify the shared folder name on the network storage server. Record Type Specify the event trigger action. The options are Snapshot and Video. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... - Page 78 Network Storage Status Save Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual...
-
Page 79: Event - Relay Handler
Save button to apply the configurations, click on this button once all the Off Time settings are confirmed for the new changes to take effect. Configure the seconds from 0 to 30 seconds. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 80: Event - Sd Record Handler
The following options are available: • Enable Trigger Alarm Detection • Enable Trigger Motion Detection • Enable Trigger Tampering Detection • Enable Trigger Network Loss Detection • Enable Trigger Scheduled Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... - Page 81 Enable or disable SD card overwrite. Record Type Configure the recording method to record the stream on to the SD card. The options are Video and Snapshot. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual...
- Page 82 Network_Rec, and ScheduledSD respectively. Server Path Configure a folder name on the SD card. The default folder names are videoAlarm, videoMotion, videoTampering, videoNetwork, and videoSchedule respectively. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual...
- Page 83 Available options are None, AllDay, Schedule1, and Schedule2. Save Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual...
-
Page 84: Event - Playback
Chapter 2: Camera Configuration Event - Playback Playback Allows users to access and review the recorded video content directly from the camera. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual... -
Page 85: Event - Tcp Notify
Input messages for the detection. Save Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Copyright © 2023 DivioTec All Rights Reserved. NDS286PRO / NDS295PRO / NDS296 User Manual...
Need help?
Do you have a question about the NDS286PRO and is the answer not in the manual?
Questions and answers