DivioTec NMP851 User Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

IP Camera NMP851

User Manual

Released on 2023.10.23

Note: The manual is subject to change without notice

NMP851 User Manual

Table of Contents

Need help?

Do you have a question about the NMP851 and is the answer not in the manual?

Questions and answers

Summary of Contents for DivioTec NMP851

Page 2: Table Of Contents
Image - PTZ ...................39 270° Corner ..................11 PTZ ....................39 360° ....................12 Preset .....................39 Hardware Installation (Pendant Mount) ..........13 Schedule Settings ................40 Hardware Installation (Ceiling Mount) ...........15 Image - ROI ...................41 Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 3 Network Storage Configurations ............69 Time Zone Setting ................56 Trigger Event ..................69 Time Setting ..................56 Recipient Setup ................69 System - Maintenance ................57 Login Certificate ................70 Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 / NMP881 User Manual NMP851 User Manual...
Page 4 SD Information ................72 Alarm/Motion/Tampering/Video Analysis Settings ......74 Record Type Selected: Snapshot ............74 Alarm/Motion/Tampering/Video Analysis Settings ......75 Record Type Selected: Video ............75 Trigger Scheduled Settings .............76 Day/Time Inclusion Filter ..............76 Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 5: Preface
▪ Do not disassemble the camera. There is no user serviceable part inside. DivioTec shall not be liable for direct, indirect, special, incidental, or ▪ Do not drop the camera or apply force on it. It may cause a malfunction.
Page 6: Rohs Compliance
+) < 0.1% or 1,000ppm, Polybrominated biphenyls (PBB) < 0.1% or 1,000ppm, and Polybrominated diphenyl Ethers (PBDE) < 0.1% or 1,000ppm. In order to meet the RoHS compliant directives, DivioTec has established an engineering and manufacturing task force to implement the introduction of green products.
Page 7: Installation Recommendations
Preface Installation Recommendations Technical Support and Assistance 1. For the most updated information of DivioTec products, visit NEXCOM’s Ensure you have a stable, clean working environment. Dust and dirt can get website at www.diviotec.com. into components and cause a malfunction. Use containers to keep small components separated.
Page 8: Conventions Used In This Manual
This will prevent injury to yourself when performing a task. Caution: CAUTION! CAUTION! CAUTION! Information to avoid damaging components or losing data. Note: Provides additional information to complete a task easily. Copyright © 2024 DivioTec INC. All Rights Reserved. viii NMP851 User Manual...
Page 9: Package Contents
Preface Package Contents The NMP851 / NMP851 series package contains the following accessories: Name Quantity IP camera Grommet kit Quick installation guide Mounting accessory kit Cable assemblies Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 10: Chapter 1: Product Introduction
– Brightness, Contrast, Saturation, Sharpness, Mirror, Flip ▪ Local storage: Support (record stream 2), 2x SD card ▪ Analytics: 3rd Party VA is optional by OEM/ODM request ▪ Min. Object Distance: 1 meter Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 11 ▪ Event trigger: Motion detection 5x5 areas, Tampering detection ▪ Notifications: Send message via e-mail or FTP Power ▪ AC: 24V DC, 24V AC ▪ PoE: IEEE 802.3bt PoE Class 5 Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 / NMP881 User Manual NMP851 User Manual...
Page 12: Removing The Protective Epe Foam And Preparing The Network Cables
Chapter 1: Product Introduction Removing the Protective EPE Foam and Preparing the Network Cables 1. Loosen the 6 anti-drop screws on the top cover and open it. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 13 2. Remove and discard the protective EPE from the lens modules. 3. Plug the spring cable back to the top cover. Then lock the 6 anti-drop screws on the top cover. (EPE) Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 14 6. . Rotate the cap to secure it on the wall mount bracket. 7. Attach the safety harness on the camera mounting plate to the hook on the camera bottom. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 16 V in (max) 30 V DO (Alarm Out) Cables will be run through the grommet on the cover and I out (max) 100 mA terminated to the accessory cables. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 17 The following table shows the input voltage range and electrical characteristics: Output Control Trigger Terminal External Status Camera Status Voltage Range Current Range 0~1V In+ & In- 3~12V 10~50mA Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 18: Hardware Installation (Wall Mount)
LOCK ( △ ) mark. Conduit Entrance 2. Tighten the captive screw on the lateral side of the bottom cover to secure the camera. Logo Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 19: Lens Position For 180°/270°/360° View
Chapter 1: Product Introduction Lens Position for 180°/270°/360° View 180° Wide 180° Tele Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 21 Note: The degrees of position indicated on these pages are for reference only. It may differ from the actual degrees due to the Note: means the place logo should be printed. tolerance of mechanical parts assembly. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 22: Hardware Installation (Pendant Mount)
Insert 3 screw anchors into the holes and secure the pendant mount to the surface using the screws for the anchors. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 24: Hardware Installation (Ceiling Mount)
2. Remove the 4 screws on the plate to remove plate from the mounting ceiling and use a driller to drill the marker ⊕ symbol in order to allow the cap. screw on the camera to pass through the drilled hole. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 25 Insert 4 screw anchors into the holes and secure the plate to the ceiling using the screws for the anchors. Positioning Label 4. Attach the safety harness on the camera mounting plate to the hook on the camera bottom. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 26 (There is only 1 screw hole on the plate for easy recognition.) fix the camera on the ceiling with the screw. Note: Refer to Step 9 in Wall/Pendant installation for details on preparing the cable (on page 7) Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 27: Chapter 2: Camera Configuration
You can access the camera via a web browser or IP-FINDER software. The program. following information outlines the instructions for each method. 4. Click the Next button on the welcome screen to continue. Next button Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 28 6. To check the available drives you can install the software to and their available and required disk space, please click on the Disk Cost button. User accounts 8. Click on the Next button to continue. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 29 9. Click on the Next button to begin installation. 10. Once the installation process is complete, click on the Close button to finish. A shortcut will be created on the desktop. Next button Close button Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 30: Ip-Finder
2. When the program is launched, it will begin searching the network for IP cameras automatically (the search will last for up to 90 seconds). You can also manually search cameras by clicking on the Search button. Camera List Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 31: Introduction To The Ip-Finder User Interface
Asterisk sign indicates that this device has “Preview”, “Assign Device Mark IP” and “Firmware Upgrade” functions. NOTE: Different IP camera models use different firmwares, please do NOT update the firmware of different models using the same firmware. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 32: Web Browser
Note: The recommended browsers to use are Internet Explorer, Safari, Firefox and Chrome. However, Chrome only supports the viewing of the web Setup menu; Live View Admin the video stream is not supported. 1234 Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 33: Main Screen Overview
Click to take a snapshot of View 1/ View 2/ View 3/ View 4. Refreshes the page. Options to change the display language. Current Time Setup Switches to full-screen view. Function Bar Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 34 If you are unable to find a correct PoE device, an alternative solution is to go to System > Maintenance > Power Detection and manually select power detection and force it to IEEE 802.3bt. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 35: Configuring The Camera's Setting
Chapter 2: Camera Configuration Configuring the Camera’s Setting 1. To configure the camera’s setting, click on the Setup button on the main screen to enter the configuration menu. Setup Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 36: Browsing Through The Configuration Menu
▪ Network – Network Storage – Basic – Relay Handler – FTP – SD Record – SSL – 802.1x – SNMP – Firewall – LDAP – DDNS – RTSP Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 37: Video - Video Configuration
0 is selected. GOP Length Configures the GOP length of the stream, the range is 2~120. Users can enter the value or adjust it through the slider bar. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 38: Secondary Stream
Bit Rate Configures the bit rate, the range is 64~4000. User can enter the value or adjust it through the slider bar. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 39: Third Stream
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 40: Audio Settings
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 41: Image - Exposure
Disable Global Mode (OFF) Set up the parameters for each image channel independently. Each image channel can be adjusted individually. After setting up the parameters, press Save to keep the configurations. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 42 Select User Define to enter the value of Maximum Gain (the range is 1~512) manually. Gain The range is 1~512. It can only be edited when Lock is selected as the AE Mode. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 43 The default setting is Auto, Ref. OFF means each channel individually and automatically adjusts the white balance. The other available options are 1, 2, 3 and 4. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 44: Day/Night Settings
To set up camera end in night mode. View 1 ~ View 4 Day to Night Switching Level Select the required level to switch from Day to Night, the available option is 1~10. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 45 Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 46: Image - Basic Settings
Configures the brightness of the image, the range is 0 ~ 100, with 0 being the lowest brightness. Enter the values or adjust the bar to increase or decrease the values. The default value is 50. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 47 Discards all the settings applied to the image and reset to the default settings. Restore All Image Settings Discards all the settings applied to the image and revert to the previous settings. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 48: Image - Ptz
User Preset 2. User Specified Presets: Users can set up custom preset configurations. The available options are Create Preset 1, Save Preset 1, Create Preset 2 and Save Preset 2. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 49: Schedule Settings
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 50: Image - Roi
5. Press the Set Area button for the setting to take effect. The ROI area will then be seen on the video stream. 6. Press the Del Area button or select OFF to delete the ROI area. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 51: Image - Privacy Zone
Mask will be seen on the video stream. 4. Press the Del Area button or select OFF to delete the privacy zone. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 52: Image - Osd
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 53: Network - Basic
Configures the HTTP port number of the web configuration menu. HTTPS Port Configures the HTTPS port number of the web configuration menu. Hardware Address Unique MAC address for each camera device. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 54: Network - Basic
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 55: Network - Ftp
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 56: Network - Ssl
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 57: Network - 802.1X
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 58: Network - Snmp
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 59: Network - Firewall
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 60: Network - Ldap
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 61: Network - Ddns
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 62: Network - Rtsp
Enables or disables RTSP unicast for stream 1 to stream 3. The RTSP port number and pathname for each stream can be configured here. Default URL Path of Stream 1 to Stream 3 Stream 1: rtsp://cameraIP/stream1 Stream 2: rtsp://cameraIP/stream2 Stream 3: rtsp://cameraIP/stream3 Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 63: Multicast (Stream 1 To Stream 3)
Audio Port Configures the port number of the audio stream. Meta IP Configures the multicast address for the html meta. Meta Port Configures the port number of the html meta. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 64 Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 65: System - Date/Time
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 66: System - Maintenance
Records all the status information of the camera in list format when the camera is connecting to the PC. Downloads the log file to the computer as a text file. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 67: Backup
Update and Restore Click on the Choose a file button and locate the backup file, once the file is selected, press the Update and Restore button to restore camera settings. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 68: Video System
Power Detection Select Auto or Manual. Power Type Select 802.3at or 802.3bt manually. Save Save to apply the configurations. Note: Select 802.3 at will cause IR to be disabled. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 69: System - User Management
User Information. Press Cancel to delete the new user if you do not want to continue the setup. To delete an account, press the Del User button. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 70: User Information
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 71: Event - Alarm Handler
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Close Press to leave this schedule setting page. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 72: Event - Motion Detection
3. Repeat the above steps to create motion areas for zones 2 to 5. To delete an area, find the motion zone number you would like to remove, and press the Del Area button. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 73: Motion Schedule Settings
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Close Press to leave this schedule setting page. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 74: Event - Tampering Alarm
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Close Press to leave this schedule setting page. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 75: Event - Ftp Upload
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 76: Event - Smtp Notification
▪ Trigger Motion Detection ▪ Trigger Tampering Alarm Message Specifies the message content. Subject Specifies the subject of the message. Attach JPEG Snapshot Enables or disables email delivery of trigger event snapshots. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 77: Smtp Server
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 78: Event - Network Storage
Specifies the IP address of the network storage server. Share Specifies the shared folder name on the network storage server. Record Type Specifies the event trigger action. The options are Snapshot and Video. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 79: Login Certificate
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 80: Event - Relay Handler
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 81: Event - Sd Record
Displays whether an SD card is installed or not. If an SD card is detected, ok will be displayed; if an SD card is not detected (or a faulty SD card is used), not_mounted will be displayed. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 82 Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 83: Alarm/Motion/Tampering/Video Analysis Settings
Tampering_yyyymmddhhmmss Server Path Configures a folder name on the SD card. The default folder names for Alarm, Motion, Tampering Detection and Video Analysis are Alarm, Motion and Tampering respectively. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 84: Alarm/Motion/Tampering/Video Analysis Settings
Server Path Configures a folder name on the SD card. The default folder names for Alarm, Motion, Tampering Detection and Video Analysis are Alarm, Motion and Tampering respectively. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...
Page 85: Trigger Scheduled Settings
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2024 DivioTec INC. All Rights Reserved. NMP851 User Manual...

DivioTec NMP851 User Manual

Chapter 1: Product Introduction

Chapter 2: Camera Configuration

Quick Links

Need help?

Questions and answers

Related Manuals for DivioTec NMP851

Summary of Contents for DivioTec NMP851

Table of Contents