Brother DCP-8040 User Manual page 50

Press the Menu numbers.
(ex. Press 1, 1 for Paper Type)
If you installed optional LAN board (NC-9100h), the LCD shows
the following LAN menu. (See the Network User's Guide on the
CD-ROM.)
Main Menu Submenu
4.LAN 1.Setup
TCP/IP
(option)
3 - 7 ON-SCREEN PROGRAMMING
OR
— —
to select
Menu
Selections
1.BOOT Method
2.IP Address
3.Subnet Mask
4.Gateway
5.Host Name
6.WINS Config
7.WINS
Server
8.DNS Server
9.APIPA
The default settings are shown in Bold with .
to select
Options Descriptions
You can choose the
Auto
BOOT method that
Static
best suits you needs.
RARP
BOOTP
DHCP
[000-255]. Enter the IP address.
[000-255].
[000-255].
[000-255]
[000-255]. Enter the Subnet
mask.
[000-255].
[000-255].
[000-255]
[000-255]. Enter the Gateway
address.
[000-255].
[000-255].
[000-255]
Enter the Host name.
BRN_XXXXXX
You can choose the
Auto
WINS configuration
Static
mode.
Specifies the IP
Primary
address of the
Secondary
primary or secondary
server.
Specifies the IP
Primary
address of the
Secondary
primary or secondary
server.
Automatically
On
allocates the IP
Off
address from the
link-local address
range.
to
to accept exit
Page
See
Network
User's
Guide
on the
CD-ROM.