Setting The Emulation Selection - Brother DCP-8040 User Manual

4
Enter your password using the
numeric keys.
Set
Press .
5
Press
Print .
Set
Press . The DCP prints the data.
—OR—
If you want to delete the secured data press
select Delete .
Stop/Exit
Press
■
If you turn the power switch off, the secured data saved in
memory will be cleared.
■
After you print the secured data, it will be cleared from
memory.

Setting the Emulation Selection

This DCP has an Automatic Emulation Selection function. When the
DCP receives information from the PC, it automatically chooses the
emulation mode. This function has been set at the factory to AUTO.
You can change the default emulation mode manually by using the
control panel.
1
Menu
Press
2
Press
HP LaserJet or BR-Script 3 .
Set
Press .
3
Stop/Exit
Press
Try this function with your application software or network
server. If the function does not work properly, either select the
required emulation mode manually using the DCP panel buttons
or use the emulation selection commands in your software.
6 - 17 USING THE DCP AS A PRINTER
or to select
.
3 1
, , .
or to select Auto ,
.
Secure Print
Test1
Password:XXXX
Enter & Set Key
or
31.Emulation
▲
Auto
HP LaserJet
▼
BS-Script 3
▲▼
Select & Set
to