Network License; Registering Your Pc With The Dcp - Brother DCP-8040 User Manual

12
Network Scanning
(Windows
Professional and XP only)
To use the DCP as a Network Scanner, the NC-9100h Network
board should be installed into the DCP and configured with TCP/IP.
You can set or change NC-9100h settings from the control panel or
with the BRAdmin Professional utility or Web Management. (Please
see the NC-9100h User's Guide on the CD-ROM.)

Network License

This product includes a single PC license. If you purchase an
optional Network LAN board NC-9100h that includes the license for
up to 4 additional Users, you can install the MFL-Pro Software Suite
including ScanSoft
network. If you want to use more than 5 PCs with ScanSoft
®
PaperPort installed, please purchase NL-5 which is a multiple PC
license agreement pack for up to an additional 5 Users. To purchase
NL-5, please contact your Brother Sales Office.

Registering your PC with the DCP

If you need to change the DCP that was registered to your PC during
the installation of Brother MFL-Pro Suite (see Quick Setup Guide on
page 34), follow the steps below.
1
For Windows
From the Start menu, select Control Panel, Scanners and
Cameras, and then right-click Scanner Device icon and select
Properties to view the Network Scanner Properties dialog box.
For Windows
From the Start menu, select Control panel, Printers and
Other Hardware, Scanners and Cameras (or Control Panel,
Scanners and Cameras).
12 - 1 NETWORK SCANNING (WINDOWS
®
98/98SE/Me/2000
® ®
PaperPort on up to 5 PC's for use on a
®
98/Me/2000
®
XP
®
98/98SE/ME/2000 PROFESSIONAL AND XP ONLY)
®