Using The Scan Key - Brother DCP-8040 User Manual

Using the scan key (For USB or
Parallel interface cable users)
Scan
You can use
word processing, graphics or E-mail applications or your computer
folder. The advantage of using
clicks required to scan from your computer.
For Scan to E-mail, Scan to Image, Scan to OCR and Scan
to File
Before you can use
connected the DCP to your Windows
loaded the appropriate Brother Drivers for your version of
®
Windows .
When you are ready to use
Control Center application is running on your computer. For
details about how to configure the Brother Control Center
buttons to launch the application of your choice using
to the appropriate chapter:
■
For Windows
Windows NT
(For Windows
Windows NT
■
For Windows
SmartUI Control Center (For Windows
■
If your DCP is connected with both a USB and a Parallel
cable, you need to select USB or Parallel as the destination
in each step.
on the control panel to scan originals into your
Scan
Scan
on the control panel, you must have
Scan
®
98/98SE/Me/2000 Professional and
®
WS 4.0, see Using the Brother Control Center
®
98/98SE/Me/2000 Professional and
®
WS 4.0) on page 9-1.
®
XP, see Using the Windows
HOW TO SCAN USING WINDOWS
is that you avoid the mouse
®
based computer and
, make sure the Brother
®
-Based Brother
®
XP) on page 10-1.
Scan
, go
®
8 - 16