Brother DCP-8040 User Manual page 217

Scan to File
When you select Scan to File you can scan a black and white or color
original and send it directly to a PC you designate on your network.
The file will be saved in the folder and file format that you have
configured in the Brother SmartUI on the designated PC. You can
Scan
change the
®
(For Windows
®
(For Windows
button configuration on page 10-5 to 10-11.)
For Network Scanning the Brother Control Center (SmartUI)
selections are used only for configuring the
will not be able to initiate a Network scan from the Brother
Control Center (SmartUI).
1
Place the original face up in the ADF, or face down on the
scanner glass.
2
Scan
Press
3
Press
to File .
Set
Press .
4
Press
destination you want to send.
Set
Press .
If the LCD prompts you to enter a PIN Number, enter the 4-digit
PIN Number for the destination PC on the control panel.
Set
Press .
The DCP will start the scanning process.
Max. 25 clients can be connected to one DCP on a Network. For
example, if 30 clients are connect at a time, 5 clients will not be
shown on the LCD.
NETWORK SCANNING (WINDOWS
configuration.
98/Me/2000: See Scan to File on page 9-8 to 9-9.)
XP: See Hardware Section: Changing the Scan to
.
or to select Scan
or to select a
®
98/98SE/ME/2000 PROFESSIONAL AND XP ONLY) 12 - 8
Scan
button. You
▲
Scan to E-mail
Scan to Image
Scan to OCR
▼
Scan to File