Brother DCP-8040 User Manual page 216

Scan to OCR
When you select Scan to OCR your original will be scanned and sent
directly to the PC you designated on your network. The Brother
SmartUI will activate ScanSoft
original into text for viewing and editing from a word processing
application on the designated PC. You can change the
configuration.
®
(For Windows
page 9-12 to 9-13.) (For Windows
Changing the Scan to button configuration on page 10-5 to 10-11.)
For Network Scanning the Brother Control Center (SmartUI)
selections are used only for configuring the
will not be able to initiate a Network scan from the Brother
Control Center (SmartUI).
1
Place the original face up in the ADF, or face down on the
scanner glass.
2
Scan
Press
3
Press
to OCR .
Set
Press .
4
Press
destination you want to send.
Set
Press .
If the LCD prompts you to enter a PIN Number, enter the 4-digit
PIN Number for the destination PC on the control panel.
Set
Press .
The DCP will start the scanning process.
12 - 7 NETWORK SCANNING (WINDOWS
®
98/Me/2000: See Scan to OCR (Word Processor) on
.
or to select Scan
or to select a
®
®
OmniPage and convert your
®
XP: See Hardware Section:
▲
Scan to E-mail
Scan to Image
Scan to OCR
▼
Scan to File
Select
98/98SE/ME/2000 PROFESSIONAL AND XP ONLY)
Scan
Scan
button. You
▲▼
& Set