Connect The Power Cord - Brother DCP-7060D Quick Setup Manual

c
Fan the stack of paper well to avoid paper jams
and misfeeds.
d
Put paper in the tray and make sure:
The paper is below the maximum paper

mark (b b b) a.
Over filling the paper tray will cause paper
jams.
 The side to be printed on must be face down.
 The paper guides touch the sides of the
paper so it will feed correctly.
e
Put the paper tray firmly back in the machine.
Make sure that it is completely inserted into the
machine.
For more information about recommended
paper, see Recommended paper and print
media in the Basic User's Guide.
1
4

Connect the power cord

IMPORTANT
DO NOT connect the interface
cable yet.
a
Connect the AC power cord to the machine,
and then plug it into an electrical socket.
b
Turn on the machine's power switch.
5