Related Manuals for Futech 570.150
Summary of Contents for Futech 570.150
- Page 1 USER EN ENGLISH MANUAL 570.150 – Drill Pointer Manual in your language? Check the back cover laseto_571_150_drill_pointer_handleiding.indd 1 laseto_571_150_drill_pointer_handleiding.indd 1 15/05/2024 11:03:10 15/05/2024 11:03:10...
-
Page 2: First Use
OVERVIEW 01 Marking aid opening 02 Power LED indicator 03 Power button 04 Red arrow/green rectangle LED indicator 05 Marking aid opening 06 Display 07 Power LED indicator 08 Power button SAFETY look at the lowest side of the front of both devices. -
Page 3: Turning On/Off
receiver flashes, the battery power is not high · Place enough of the supplied adhesive putty to enough and must be replaced. each of the 4 arc-shaped indentations on the underside of the transmitter. · Before battery replacement, make sure the device is turned off. -
Page 4: Offset Measurement
surface in the respective directions shown by OFFSET MEASUREMENT the receivers red arrow LED indicators [08]. If the required drilling position is located at a wall The green rectangle LED indicators of the corner or immediately adjacent to concrete walls receiver show whether the opening of the containing steel reinforcement or other metal receiver [06] and the transmitter [01] are aligned. -
Page 5: Multipoint Measurement
· When the apertures of the transmitter and receiver are aligned, make a mark at the center of the aperture of the receiver. · Transfer the distance measured in the first step in the direction of the required drilling point. MULTIPOINT MEASUREMENT ·... -
Page 6: Maintenance
the transmitter and receiver can be aligned MAINTENANCE using two identical wedge-shaped supports. The Periodically wipe the case with a damp cloth and a angles of the wedges must match the required little mild detergent. Do not use abrasives or solvents. drilling angle. -
Page 7: Specifications
SPECIFICATIONS RECEIVER TRANSMITTER LED Indicators 13 LEDs 1 LEDs LED display 3x 7 segments Warning signals Measuring depth: positioning 2-150 cm well thickness Measuring depth: depth display 2-200 cm drilling depth Accuracy: measured depth Typically 5% Accuracy: position-finding* Without steel reinforced walls: ± 3 mm With steel reinforced walls: ±... - Page 8 USER MANUAL other languages: DANSK ITALIANO DEUTSCH NEDERLANDS ESPAÑOL NORSK EESTI KEEL PORTUGUÊS SUOMEN KIELI SLOVENŠČINA FRANÇAIS SVENSKA ÍSLENSKA Facebook @futechtools LinkedIn futechtools World Wide Web futech-tools.com YouTube @futechtools laseto_571_150_drill_pointer_handleiding.indd 8 laseto_571_150_drill_pointer_handleiding.indd 8 15/05/2024 11:03:12 15/05/2024 11:03:12...
Need help?
Do you have a question about the 570.150 and is the answer not in the manual?
Questions and answers