Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for PCE Instruments PCE-MPM 10
Summary of Contents for PCE Instruments PCE-MPM 10
- Page 1 User Manual PCE-MPM 10 Manometer User manuals in various languages (français, italiano, español, português, nederlands, türk, polski, русский, 中文) can be found by using our product search on: www.pce-instruments.com Last change: 28 May 2024 v1.0 © PCE Instruments...
-
Page 2: Table Of Contents
Freeze measured value ................ 4 Highest / lowest and average measured value ........5 Backlight ....................5 10 Automatic power-off ................5 11 Units ....................... 5 12 Battery ....................5 13 Contact ....................6 14 Disposal ....................6 © PCE Instruments... -
Page 3: Safety Notes
Please read this manual carefully and completely before you use the device for the first time. The device may only be used by qualified personnel and repaired by PCE Instruments personnel. Damage or injuries caused by non-observance of the manual are excluded from our liability and not covered by our warranty. -
Page 4: Specifications
-10 ... 60 °C / 14 ... 140 °F, <90 % RH, non-condensing Hose connection 2 x 8 mm / 0.078 x 0.315" Power supply 3 x 1.5 V batteries Dimensions 140 x 52 x 28 mm / 5.5 x 2.0 x 1.1" Weight 130 g / 4.58 oz © PCE Instruments... -
Page 5: Delivery Scope
Delivery scope 1 x manometer PCE-MPM 10 2 x 1 m hose connection 3 x 1.5 V battery 1 x user manual Device description Description Positive pressure connection Negative pressure connection Display Key for backlight and automatic power-off Hold key / zero point key... -
Page 6: Display Description
Note: A different zero point does not change the maximum measurement range. Freeze measured value To freeze the displayed measured value, briefly press the "HOLD" key once. HOLD" appears on the display and the measured value is frozen. To resume the measurement, press the "HOLD" key again. © PCE Instruments... -
Page 7: Highest / Lowest And Average Measured Value
Battery appears on the display, the batteries are discharged and must be replaced. Use 3 x 1.5 V batteries. To replace the batteries, open the battery compartment on the back of the device. Observe the correct polarity. © PCE Instruments... -
Page 8: 13 Contact
For countries outside the EU, batteries and devices should be disposed of in accordance with your local waste regulations. If you have any questions, please contact PCE Instruments. © PCE Instruments... - Page 9 PCE Instruments contact information Germany France Spain PCE Deutschland GmbH PCE Instruments France EURL PCE Ibérica S.L. Im Langel 26 23, rue de Strasbourg Calle Mula, 8 D-59872 Meschede 67250 Soultz-Sous-Forets 02500 Tobarra (Albacete) Deutschland France España Tel.: +49 (0) 2903 976 99 0 Téléphone: +33 (0) 972 3537 17...
Need help?
Do you have a question about the PCE-MPM 10 and is the answer not in the manual?
Questions and answers