Motorola IDEN WIRELESS DATA SERVICES User Manual page 19

14. Click "OK" when this window appears.
To continue the installation, see one of the following sections:
• To install on Windows NT, see "Windows NT Installation Only" on
page 15.
• To install on Windows 2000 or Windows XP, see "Windows 2000 and
Windows XP Installations" on page 22.
• To install on Windows 95, Window 98, Windows ME, or Windows XP,
see "Completing Software Installation for All Operating Systems" on
page 30.
Windows NT Installation Only
Your interface may appear slightly different than the
following illustration, but the options will be the same.
Administrative rights are required.Windows NT (Service
Pack 3) must be installed.
There is a baud rate setting for your computer and a baud
rate setting for your phone. If you do not choose AutoDetect
and accept the default baud rate of 19200, be sure the
settings for the computer and the phone are the same. If they
are not, your computer might have a problem connecting
with the phone.
To check the baud rate on your phone, press * # 6 0 on the
keypad.
At baud rates of 115.2K and 57.6K, you must set both the
PC and your phone to Hardware Flow Control for circuit
data and packet data. Additionally, for optimum
performance, set the Advance Port Settings as follows:
WINNT/2000: FIFO Enabled
Setting Up Windows Components
N O T E
N O T E
I M P O R T A N T
15