Motorola IDEN WIRELESS DATA SERVICES User Manual page 100

Wireless Data Services
Mobile IP Authentication Key
The iDEN network uses the MIP Authentication Key to
verify the authenticity of the DCE with the Home Agent. The
DCE and the Home Agent must have identical values for
this shared secret key for the DCE to satisfy the
authentication process.
NOTE: This command is applicable only when the Mobile
Node Client in the DCE is Activated.
Action
+WV301
Query
Range
Parameter Values:
The Authentication Key parameter is a text string of up to
32 characters. Unlike most text-string parameters, the
Authentication Key is a text representation of a
hexadecimal number. Therefore, only the characters 0-9
and A-F are acceptable. (The lower case characters, a-f,
are also acceptable).
Note that although this parameter represents a numeric
value, the parameter is actually a text string, so the
parameter must be enclosed in quotation marks.
Mobile IP Session Timer
This command determines the maximum amount of time
that a remote node can be registered with its Home Agent
before having to renew its registration. This parameter sets
a user preference for a value that is negotiated within the
network. During the negotiation process, the user
preference may be overruled by the network without
notification.
Action
+WV302
Query
Range
Parameter Values:
1800-65534
65535
7200
96
" "
AT+wv301=< key >
AT+wv301=?
AT+wv302=<timer>
AT+wv302?
AT+wv302=?
Seconds before expiration
Timer never expires
Default value