1. Manuals
  2. Brands
  3. ASRock Industrial Manuals
  4. Motherboard
  5. IMB-1244-WV
  6. User manual

ASRock Industrial IMB-1244-WV User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
IMB-1244-WV
IMB-X1244-WV
User Manual
Version 1.0
Published September 13, 2024
Copyright©2024 ASRockInd INC. All rights reserved.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IMB-1244-WV and is the answer not in the manual?

Questions and answers

Related Manuals for ASRock Industrial IMB-1244-WV

Summary of Contents for ASRock Industrial IMB-1244-WV

  • Page 1 IMB-1244-WV IMB-X1244-WV User Manual Version 1.0 Published September 13, 2024 Copyright©2024 ASRockInd INC. All rights reserved.
  • Page 2 Version 1.0 Published September 13, 2024 Copyright©2024 ASRockInd INC. All rights reserved. Copyright Notice: No part of this documentation may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRockInd Inc.
  • Page 3 WARNING THIS PRODUCT CONTAINS A BUTTON BATTERY If swallowed, a button battery can cause serious injury or death. Please keep batteries out of sight or reach of children. CALIFORNIA, USA ONLY The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate Best Management Practices (BMP) regulations passed by the California Legislature.
  • Page 4 *15G062470003AI* P/N: 15G062470003AI V1.2 Button Battery Safety Notice Button Battery Safety Notice WARNING • INGESTION HAZARD: This product contains a button cell or coin battery. • DEATH or serious injury can occur if ingested. • A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.

  • Page 5: Table Of Contents

    Contents Chapter 1 Introduction Package Contents Specifications Motherboard Layout I/O Panel Block Diagram Chapter 2 Installation Screw Holes Pre-installation Precautions Installation of Memory Modules (SO-DIMM) Expansion Slots Jumpers Setup Onboard Headers and Connectors Chapter 3 UEFI SETUP UTILITY Introduction 3.1.1 Entering BIOS Setup 3.1.2 UEFI Menu Bar...
  • Page 6 3.3.4 Super IO Configuration 3.3.5 AMT Configuration 3.3.6 ACPI Configuration 3.3.7 USB Configuration 3.3.8 Trusted Computing Hardware Health Event Monitoring Screen Security Screen Boot Screen Exit Screen...

  • Page 7: Chapter 1 Introduction

    IMB-1244-WV_IMB-X1244-WV Chapter 1 Introduction Thank you for purchasing ASRockInd IMB-1244-WV / IMB-X1244-WV motherboard, a reliable motherboard produced under ASRockInd’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRockInd’s commitment to quality and endurance. In this manual, chapter 1 and 2 contain introduction of the motherboard and step-by-step guide to the hardware installation.

  • Page 8: Specifications

    System Chipset IMB-X1244-WV: Intel® W680 Socket LGA1700 BIOS AMI SPI 256 Mbit IMB-1244-WV: Dual Channel DDR5 4800/5600 MHz* IMB-X1244-WV: Dual Channel ECC/non-ECC DDR5 4800/5600 MHz* Technology *Actual memory frequency depends on the CPU types and DRAM Memory modules, for more information refer to https://www.asrockind.com/ en-gb/index.php?route=newsblog/faq&faq_id=90 technical FAQ...
  • Page 9 IMB-1244-WV_IMB-X1244-WV LAN1: Intel® I226V with 10/100/1000/2500 Controller/ Mbps Ethernet Speed LAN2: Intel® I219LM with 10/100/1000 Mbps, supports vPro Controller 2 x RJ-45 HDMI 2 x HDMI 2.0b DisplayPort 1 x DP 1.4a++ 1 x 2.5 Gigabit LAN Ethernet Rear I/O 1 x 1 Gigabit LAN 4 x USB 3.2 Gen2 2 (Line-in, Line-out or Mic-in, Line-out...
  • Page 10 Watchdog Output From Super I/O to drag RESETCON# Timer Interval 256 Segments, 0, 1, 2, ...255 sec Input PWR 12~28V DC-In with 4-pin wafer PWR cable AT/ATX Supported Power - AT : Directly PWR on as power input ready Requirements Power On - ATX : Press button to PWR on after power input ready...

  • Page 11: Motherboard Layout

    IMB-1244-WV_IMB-X1244-WV 1.3 Motherboard Layout IMB-1244-WV IMB-X1244-WV Top : PWR_COM1 JGPIO_PWR1 JGPIO_SET1 HEATER1 PCIE_MODE1 DC_4PIN2 PCIE1 COM4 COM1 JGPIO1 COM3 CPU_FAN1 DC_4PIN1 USB 3.2 Gen2 Top: USB3_2 USB3_4_9 Bottom: USB3_1 USB 3.2 Gen2 Top: USB3_8 M2_KEYM1 Bottom: USB3_7 USB2_10_11 USB2_5_6 SATA_PWR1...
  • Page 12 Bottom : ESPI1 EDP1 M2_B1...
  • Page 13 IMB-1244-WV_IMB-X1244-WV 1 : EXTRA_PCIE_PWR_IN Connector (White) (DC_4PIN2) 2 : 4-pin ATX PWR Connector (Black) (DC_4PIN1) 3 : SATA Power Output Connector (SATA_PWR1) 4 : PCIE_PWR_MODE (PCIE_MODE1) 5 : USB 3.2 Gen1 Header (USB3_4_9) 6 : USB 2.0 Headers (USB2_5_6, USB2_10_11) 7 : M.2 Key-M Socket (M2_KEYM1) 8 : Digital Input / Output Default Value Setting (JGPIO_SET1) 9 : Digital Input / Output Power Select (JGPIO_PWR1)
  • Page 14 Back Side: 35 : ESPI Header (ESPI1) 36 : M.2 Key-B Socket (M2_B1) 37 : eDP Connector (EDP1, refer to No. 22)

  • Page 15: I/O Panel

    IMB-1244-WV_IMB-X1244-WV 1.4 I/O Panel USB 3.2 Gen2 Ports (USB3_1_2) RJ45 LAN Port (LAN2) (supports vPro)* USB 3.2 Gen2 Ports (USB3_7_8) RJ45 LAN Port (LAN1)** HDMI Port (HDMI1) Audio Jack : Green - Line Out DisplayPort (DP) Audio Jack : Blue - Line In HDMI Port (HDMI2) * There are two LEDs next to the LAN2 port.

  • Page 16: Block Diagram

    1.5 Block Diagram IMB-X1244_1244-WV Connector SO-DIMM HDMI Intel HDMI Channel A DDR5 (A1) Connector IT66318 4800/5600MHz Alder Lake-S & SO-DIMM Channel B DDR5 Display port Raptor Lake-S & Raptor (B1) 4800/5600MHz Connector Lake-S Refresh Processor PCIe x16 or HDMI PCIe Gen4 [0:15] LGA-1700 x8/x8 Slot Connector...

  • Page 17: Chapter 2 Installation

    ASRock Industrial has positioned the chipset on the rear of the PCB to optimize space and improve thermal dissipation when the chipset heatsink contacts the chassis via a thermal pad.

  • Page 18: Installation Of Memory Modules (So-Dimm)

    2.3 Installation of Memory Modules (SO-DIMM) IMB-1244-WV / IMB-X1244-WV provides two 262-pin DDR5 (Double Data Rate 5) SO- DIMM slot, and supports Dual Channel Memory Technology. Carefully insert the SO-DIMM memory modules into the slot at a 30-degree angle. Push down until the modules snap into place.

  • Page 19: Expansion Slots

    IMB-1244-WV_IMB-X1244-WV 2.4 Expansion Slots There are one PCI Express slot, four M.2 sockets and one SIM socket on this motherboard. PCI Express slot: PCIE1 (PCIE 4.0 x16 slot) is a right-angled slot that accommodates PCI Express x16 lane width cards and supports riser cards Due to power design of the motherboard, we recommend customer using the power adapter with suggested DC-input voltage shown in the table below for system stability.
  • Page 20 M.2 Key-E Socket M.2 Key-B Socket (M2_KEYE1) (M2_B1) Signal Name Signal Name Signal Name Signal Name +3.3V +3.3V USB_D+ +3.3V +3.3V USB_D- Full_Card_Power_ CNV_WGR_D1- CNV_RF_RESET USB_D+ W_DISABLE1# 11 CNV_WGR_D1+ USB_D- MODEM_ CLKREQ CNV_WGR_D0- 17 CNV_WGR_D0+ 21 CNV_WGR_CLK- CNV_BRI_RSP 23 CNV_WGR_CLK+ USB3_RX- UIM_RESET CNV_BGI_DT...

  • Page 21: Jumpers Setup

    IMB-1244-WV_IMB-X1244-WV 2.5 Jumpers Setup The illustration shows how jumpers are setup. When the jumper cap is placed on pins, the jumper is “Short.” If no jumper cap is placed on pins, the jumper is “Open. ” The illustration shows a 3-pin jumper whose pin1 and pin2 are “Short”...
  • Page 22 COM Port Pin9 PWR Setting Jumper Setting Description +5V (Default) (3-pin PWR_COM1 (For COM Port1)) +12V (see p. 5, No. 10) The maximum current for per port is 1A, and the power supply is either 5V or 12V. Use the jumpers to set the power for COM port pin 9.
  • Page 23 IMB-1244-WV_IMB-X1244-WV CLRMOS2 allows you to clear the data in CMOS automatically when AC power on. The data in CMOS includes system setup information such as system password and system setup parameters. To clear and reset the system parameters to default setup, please turn off the com- puter and unplug the power cord, and then use a jumper cap to short the pins on CLRMOS2.

  • Page 24: Onboard Headers And Connectors

    2.6 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause per- manent damage of the motherboard! EXTRA_PCIE_PWR_IN Connector (White) Signal Name Signal Name (4-pin DC_4PIN2)
  • Page 25 IMB-1244-WV_IMB-X1244-WV USB 3.2 Gen1 Header Signal Name Signal Name DUMMY IntA_PA_D+ (19-pin USB3_4_9) IntA_PB_D+ IntA_PA_D- (see p. 5, No. 5) IntA_PB_D- IntA_PA_SSTX+ 8 9 IntA_PB_SSTX+ IntA_PA_SSTX- 10 11 IntA_PB_SSTX- IntA_PA_SSRX+ 14 15 IntA_PB_SSRX+ IntA_PA_SSRX- 16 17 IntA_PB_SSRX- Vbus Vbus There is one USB 3.2 Gen1 header on this motherboard. This header can support two USB 3.2 Gen1 ports with maximum power current 0.9A per port.
  • Page 26 COM Port Headers Signal Name Signal Name DDCD# RRXD (9-pin COM 1, 3) (RS232/422/485)* TTXD DDTR# (9-pin COM 4) (RS232) DDSR# (see p. 5, No. 12) RRTS# CCTS# There are two 2.00mm-pitch COM port headers (COM1, 3) supporting RS232/422/485. The maximum current is 1A per port. The power supply of pin 9 is either 5V or 12V; use the COM Port Pin 9 PWR Setting Jumper to control it.
  • Page 27 IMB-1244-WV_IMB-X1244-WV Inverter Power Control Wafer Signal Name (6-pin BLT_PWR1) (see p. 5, No. 20) CON_LBKLT_CTL CON_LBKLT_EN LCD_BLT_VCC LCD_BLT_VCC LVDS Panel Connector Signal Name Signal Name LCD_VCC LCD_VCC (40-pin LVDS1) +3.3V LVDS_A_DATA0# (see p. 5, No. 21) PD (Panel LVDS_A_DATA0 Detection)* LVDS_A_DATA1# LVDS_A_DATA1 LVDS_A_DATA2#...
  • Page 28 Inverter Power Control Wafer Signal Name (6-pin EDP_BLT_PWR2) (see p. 5, No. 23) eDP_LBKLT_CTL eDP_LBKLT_EN +12_FUSE +12_FUSE SMBUS_TEST1 Signal Name GPP_E7 (4-pin SMBUS_TEST1) SMB_CLK_MAIIN (see p. 5, No. 24) SMB_DATA_MAIN System Panel Header Signal Name Signal Name HDLED+ PLED+ (9-pin PANEL1) HDLED- PLED- (see p.
  • Page 29 IMB-1244-WV_IMB-X1244-WV AT_TEST1_PCIE_PWR1 Setting Description (4-pin AT_TEST1_PCIE_PWR1) AT_TEST1 (see p. 5, No. 27) (For Internal Test) PCIE_PWR1 (For VGA Power Card Only): Pin3: PSON# Pin4: GND SATA3 Connector Signal Name (7-pin SATA3_0) SATA-A+ (see p. 5, No. 28) SATA-A- SATA-B- SATA3_5 SATA3_6 SATA-B+ The Serial ATA3 (SATA3) connector supports SATA data cables for internal storage de- vices.
  • Page 30 Chassis Fan Connector (+12V) Signal Name (4-pin CHA_FAN1) +12V (see p. 5, No. 34) CHA_FAN_SPEED FAN_SPEED_CONTROL The board offers three 4-pin chassis fan (Smart Fan) connectors which are compatible with 3-pin chassis fan. If you connect a 3-pin chassis fan to the chassis fan connector on this moth- erboard, please connect it to pin 1-3.
  • Page 31 IMB-1244-WV_IMB-X1244-WV eDP Connector (on the backside of LVDS1) Signal Name (40-pin EDP1) (see p. 6, No. 37) eDP_TX#3_CON eDP_TX3_CON eDP_TX#2_CON eDP_TX2_CON eDP_TX#1_CON eDP_TX1_CON eDP_TX#0_CON eDP_TX0_CON eDP_AUX_CON eDP_AUX#_CON LCD_VCC LCD_VCC LCD_VCC LCD_VCC eDP_HPD_CON eDP_BKLTEN eDP_BKLTCTL_R SMB_DATA_MAIN SMB_CLK_MAIN LCD_BLT_VCC LCD_BLT_VCC LCD_BLT_VCC LCD_BLT_VCC...

  • Page 32: Chapter 3 Uefi Setup Utility

    Chapter 3 UEFI SETUP UTILITY 3.1 Introduction ASRock Industrial UEFI (Unified Extensible Firmware Interface) is a BIOS utility which offers tweak-friendly options in an advanced viewing interface. The UEFI system works with a USB mouse and offers users a faster, sleeker experience.

  • Page 33: Uefi Menu Bar

    IMB-1244-WV_IMB-X1244-WV 3.1.2 UEFI Menu Bar The top of the screen has a menu bar with the following selections: Main For setting system time/date information For advanced system configurations Advanced H/W Monitor Displays current hardware status Security For security settings Boot For configuring boot settings and boot priority Exit Exit the current screen or the UEFI Setup Utility...

  • Page 34: Navigation Keys

    3.1.3 Navigation Keys Use < > key or < > key to choose among the selections on the menu bar, and use < > key or < > key to move the cursor up or down to select items, then press <Enter> to get into the sub screen.

  • Page 35: Main Screen

    IMB-1244-WV_IMB-X1244-WV 3.2 Main Screen When you enter the UEFI SETUP UTILITY, the Main screen will appear and display the system overview. Because the UEFI software is constantly being updated, the following UEFI setup screens and descriptions are for reference purpose only, and they may not exactly match what you see on your screen.

  • Page 36: Advanced Screen

    3.3 Advanced Screen I n t h i s s ec t ion, you may s et t he con f ig u r at ions for t he fol low i ng items: CPU Configuration, Chipset Configuration, Storage Configuration, Super IO Configuration, AMT Configuration, ACPI Configuration, USB Configuration and Trusted Computing.

  • Page 37: Cpu Configuration

    IMB-1244-WV_IMB-X1244-WV 3.3.1 CPU Configuration Intel Hyper Threading Technology Intel Hyper Threading Technology allows multiple threads to run on each core, so that the overall performance on threaded software is improved. Configuration options: [Enabled] [Disabled] Active Processor P-Cores This allows you to select the number of cores to enable in each processor package. CPU C States Support Allows you to enable CPU C States Support for power saving.
  • Page 38 CFG Lock The option allows you to enable or disable the CFG Lock. Configuration options: [Enabled] [Disabled] Intel Virtualization Technology Intel Virtualization Technology allows a platform to run multiple operating systems and applications in independent partitions, so that one computer system can function as mul- tiple virtual systems.

  • Page 39: Chipset Configuration

    IMB-1244-WV_IMB-X1244-WV 3.3.2 Chipset Configuration Primary Graphics Adapter The option allows you to select a primary VGA. Configuration options: [Onboard] [PCI Express] (Options vary when you have installed a graphics card on your motherboard.) Above 4G Decoding The option allows you to enable or disable above 4G Memory Mapped IO decoding. This is disabled automatically when Aperture Size is set to 2048MB.
  • Page 40 SR-IOV Support If system has SR-IOV capable PCIe Devices, this option Enables or Disables Single Root IO Virtualization Support. Configuration options: [Enabled] [Disabled] PCIE1 Bandwidth Mode Select PCIE1 Bandwidth. Select [PCIE4] when using PCIE4 slot. Select [x8 / x8 Mode] when using Riser card on PCIE1 slot.
  • Page 41 IMB-1244-WV_IMB-X1244-WV Active LVDS Use this to enable or disable the LVDS. The default value is [Disabled]. Set the item to [Enabled]. Then press <F10> to save the setting and restart the system. Now the default value of Active LVDS is changed to [Enabled] (F9 load default is also set to [Enabled]). Change the setting from [Enabled] to [Disabled], and then press <F10>...

  • Page 42: Storage Configuration

    3.3.3 Storage Configuration VMD Configuration This item allows you to enable or disable the Intel VMD support function. SATA Controller(s) Allows you to enable or disable the SATA controllers. Configuration options: [Enabled] [Disabled] SATA Mode Selection AHCI: Supports new features that improve performance. Configuration option: [AHCI] Hybrid Storage Detection and Configuration Mode Hybrid Storage Detection and Configuration Mode allows you to select Hybrid Storage...
  • Page 43 IMB-1244-WV_IMB-X1244-WV Hard Disk S.M.A.R.T. S.M.A.R.T stands for Self-Monitoring, Analysis, and Reporting Technology. It is a monitoring system for computer hard disk drives to detect and report on various indica- tors of reliability. Configuration options: [Enabled] [Disabled]...

  • Page 44: Super Io Configuration

    3.3.4 Super IO Configuration COM1 Configuration Use this to set parameters of COM1. Type Select Use this to select COM1 port type: [RS232], [RS422] or [RS485]. COM3 Configuration Use this to set parameters of COM3. Type Select Use this to select COM3 port type: [RS232], [RS422] or [RS485]. COM4 Configuration Use this to set parameters of COM4.

  • Page 45: Amt Configuration

    IMB-1244-WV_IMB-X1244-WV 3.3.5 AMT Configuration USB Provisioning of AMT Use this to enable or disable AMT USB Provisioning. The default is [Disabled]. MAC Pass Through The option enables or disables MAC Pass Through function. Activate Remote Assistance Process Trigger CIRA boot. The default is [Disabled]. Un-Configure ME Un-Configure ME without password.
  • Page 46 MEBx This Formset contains forms for configuring MEBx.

  • Page 47: Acpi Configuration

    IMB-1244-WV_IMB-X1244-WV 3.3.6 ACPI Configuration Suspend to RAM Suspend to R A M a l lows you to select [Disabled] for ACPI suspend t y pe S1. It is recommended to select [Auto] for ACPI S3 power saving. Configuration options: [Auto] [Disabled] PCIE Devices Power On Use this item to enable or disable PCIE devices to turn on the system from the power-soft- off mode.

  • Page 48: Usb Configuration

    3.3.7 USB Configuration USB Power Control Use this option to control USB power. M.2 Key_B USB Function The item enables or disables M.2 Key_B USB function.

  • Page 49: Trusted Computing

    IMB-1244-WV_IMB-X1244-WV 3.3.8 Trusted Computing NOTE: Options vary depending on the version of your connected TPM module. Security Device Support Security Device Support allows you to enable or disable BIOS support for security device. O.S. will not show Security Device. TCG EFI protocol and INT1A interface will not be available.
  • Page 50 Pending Operation Pending Operation allows you to schedule an Operation for the Security Device. NOTE: Your computer will reboot during restart in order to change State of the Device. Configuration options: [None] [TPM Clear] Platform Hierarchy This item allows you to enable or disable Platform Hierarchy. Configuration options: [Enabled] [Disabled] Storage Hierarchy This item allows you to enable or disable Storage Hierarchy.

  • Page 51: Hardware Health Event Monitoring Screen

    IMB-1244-WV_IMB-X1244-WV 3.4 Hardware Health Event Monitoring Screen This section allows you to monitor the status of the hardware on your system, including the parameters of the CPU temperature, motherboard temperature, CPU fan speed, chassis fan speed, and the critical voltage. NOTE: Options vary depending on the features of your motherboard.
  • Page 52 Clear Status This option appears only when the case open has been detected. Use this option to keep or clear the record of previous chassis intrusion status.

  • Page 53: Security Screen

    IMB-1244-WV_IMB-X1244-WV 3.5 Security Screen In this section you may set or change the supervisor/user password for the system. You may also clear the user password. Supervisor Password Set or change the password for the administrator account. Only the administrator has authority to change the settings in the UEFI Setup Utility.
  • Page 54 Secure Boot Mode [Standard] Select this item and the system will automatically load the Secure Boot keys from the BIOS database. [Custom] Select this item and Secure Boot Policy variables can be configured by a physi- cally present user without full authentication. Install default Secure Boot Keys Please install default secure boot keys if it’s the first time you use secure boot.

  • Page 55: Boot Screen

    IMB-1244-WV_IMB-X1244-WV 3.6 Boot Screen This section displays the available devices on your system for you to configure the boot settings and the boot priority. Boot From Onboard LAN The item allows the system to be waked up by the onboard LAN. Configuration options: [Enabled] [Disabled] Setup Prompt Timeout The item...

  • Page 56: Exit Screen

    3.7 Exit Screen Save Changes and Exit When you select this option, the following message “Save configuration changes and exit setup?” will pop out. Press <F10> key or select [Yes] to save the changes and exit the UEFI SETUP UTILITY. Discard Changes and Exit When you select this option, the following message “Discard changes and exit setup?”...

This manual is also suitable for:

Imb-x1244-wv

Table of Contents