Connecting Your Tv And Vcr To The Media Center; Option A: Tv (With Audio Output Jacks) + Vcr + Media Center - Bose 3.2.1 GSX Owner's Manual

S S
YSTEM ETUP

Connecting your TV and VCR to the media center

Figure 12
Option A connections
Stereo cable
(red and white connectors)
16
There are two options for connecting your TV and VCR to the media center.
• Option A: TV with audio output jacks+VCR
• Option B: TV without audio output jacks+VCR
Before proceeding, check your TV for audio output jacks.

Option A: TV (with audio output jacks) + VCR + media center

If your TV has audio output jacks, you can directly route the TV audio to the 3•2•1 GSX home
entertainment system (Figure 12).
1. Connect one end of the supplied stereo cable to the TV Audio IN jacks on the rear panel
of the media center. Insert the white RCA plug into the TV white L jack. Insert the red
RCA plug into the TV red R jack.
2. Connect the other end of the stereo cable to the audio output jacks on your TV. Insert the
white RCA plug into the white AUDIO OUT L jack. Insert the red RCA plug into the red
AUDIO OUT R jack.
3. Insert one end of the supplied video cable (yellow) to the Video OUT C (composite) jack
on the back of the media center. Insert the other end of the video cable into one of the
video input jacks on your TV.
Write the name of the video input jack used on your TV in the box on page 25. After
you turn the system on, you will need to select this video input on your TV in order
to view the 3•2•1 GSX system video output.
Video cable
(yellow connectors)
Français Español
Cable/satellite box
Cable
service
Cable
TV connector service
panel
*
English
(if applicable)
VCR
TV