Connecting Your Tv And Vcr To The Media Center; If Your Tv Has Audio Output Jacks - Bose 3.2.1 GS Series II, 3.2.1 Series II Owner's Manual

System Setup

Connecting your TV and VCR to the media center

Figure 12
TV and VCR connections
with media center
Stereo cable
(red and white connectors)
16
Note: There are two options for connecting your TV and VCR to the media center. Before you
proceed, you must determine if your TV has audio output jacks. Consult your TV owner's guide if
you need assistance.

If your TV has audio output jacks

If your TV has audio output jacks, you can directly route the TV audio to the 3•2•1 home
entertainment system (Figure 12).
1. Connect one end of the supplied stereo cable to the TV Audio IN jacks on the rear panel
of the media center. Insert the white RCA plug into the TV white L jack. Insert the red
RCA plug into the TV red R jack.
2. Connect the other end of the stereo cable to the audio output jacks on your TV. Insert the
white RCA plug into the white AUDIO OUT L jack. Insert the red RCA plug into the red
AUDIO OUT R jack.
3. Insert one end of the supplied video cable (yellow) to the Video OUT C (composite) jack
on the back of the media center. Insert the other end of the video cable into one of the
video input jacks on your TV.
Remember the name of the TV video input you plugged the video cable into (for
example: Video 1, Input 1, or Aux). Later, you will need to select the corresponding
video input on your TV in order to view the 3•2•1 system video output.
Video cable
(yellow connectors)
TV connector
panel
*
*
Could be labelled "FIXED", "MONITOR", or "HiFi".
Cable/satellite box
(if applicable)
Existing
cable
VCR
Existing
cable
TV