Description Of Each Menu - BenQ W1000 User Manual

Description of each menu

FUNCTION
Picture Mode
Reference
Mode
Brightness
Contrast
Color
Tint
Sharpness
Flesh Tone
Save Settings
Reset Picture
Settings
46 Operation
DESCRIPTION
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See
picture mode" on page 33
Selects a picture mode that most suits your need for the image quality
and further fine-tune the image based on the selections listed on the
same page below. See "Setting the User 1/User 2/User 3 mode" on
page 33 for details.
Adjusts the brightness of the image. See
page 34 for details.
Adjusts the degree of difference between dark and light in the image.
See "Adjusting Contrast" on page 34
Adjusts the color saturation level -- the amount of each color in a
video image. See "Adjusting Color" on page 34
This function is only available when Video or S-Video with NTSC
system is selected.
Adjusts the red and green color tones of the image. See
Tint" on page 34 for details.
This function is only available when Video or S-Video with NTSC
system is selected.
Adjusts the image to make it look sharper or softer. See
Sharpness" on page 34 for details.
This function is only available when Video or S-Video with NTSC
system is selected.
See "Adjusting Flesh Tone" on page 34
Saves the settings made for User 1 or User 2 or User 3 mode.
Resets the picture settings for User 1 or User 2 or User 3 mode.
for details.
"Adjusting Brightness" on
for details.
for details.
for details.
"Selecting a
"Adjusting
"Adjusting