Optimizing The Image - BenQ W1000 User Manual

Optimizing the image

Selecting a picture mode
The projector is preset with several predefined picture
modes so that you can choose one to suit your operating
environment and input signal picture type.
To select an operation mode that suits your need, you
can follow one of the following steps.
• Press MODE/ENTER on the projector repeatedly
until your desired mode is selected.
• Go to the PICTURE: Basic > Picture Mode menu
and press
The picture modes available for different types of signals are listed below.
1. Cinema mode: Is appropriate for playing colorful movies, video clips from digital
cameras or DVs through the PC input for best viewing in a blackened (little light)
environment.
2. Dynamic mode: Maximizes the brightness of the projected image. This mode is
suitable for environments where extra-high brightness is required, such as using the
projector in well lit rooms.
3. Standard mode (Default): Is appropriate for viewing colorful movies, video clips
from digital cameras or DVs.
4. User 1/User 2/User 3 mode: Recalls the settings customized based on the current
available picture modes. See
details.
Setting the User 1/User 2/User 3 mode
There are three user-definable modes if the current available picture modes are not suitable
for your need. You can use one of the picture modes (except the User 1/User 2/User 3) as a
starting point and customize the settings.
1. Press MENU/EXIT to open the On-Screen Display (OSD) menu.
2. Go to the PICTURE: Basic > Picture Mode menu.
3. Press /
4. Press to highlight Reference Mode.
This function is only available when User 1/User 2/User 3 mode is selected up in the Picture
Mode sub-menu item.
5. Press /
6. Press to select a sub-menu item to be changed and adjust the value with
See "Fine-tuning the image quality in user modes"
7. When all settings have been done, highlight Save Settings and press MODE/ENTER
to store the settings.
8. The confirmation message 'Setting Saved' displays.
/ to select a desired mode.
"Setting the User 1/User 2/User 3 mode" on page 33
to select User 1 to User 2/User 3.
to select a picture mode that is closest to your need.
below for details.
Operation
for
/ .
33