Correcting Keystone - BenQ W1000 User Manual

Correcting keystone

Keystoning refers to the situation where the projected image is noticeably wider at either the
top or bottom. It occurs when the projector is not perpendicular to the screen.
To correct this, besides adjusting the height of the projector, and use Auto Keystone or
Keystone to manually correct it following one of these steps.
• Using Auto Keystone
It can correct Keystone to optimal status by automatically.
• Using the remote control
1. Press MENU/EXIT and then press
2. Press
Keystone function.
3. Press
control to display the Keystone correction
page. Press
the top of the image. Press
keystoning at the bottom of the image.
• Using the OSD menu
1. Press MENU/EXIT and then press
until the
highlighted.
2. Press
press
Keystone function.
3. Press MENU/EXIT and then press
until the
4. Press
image or press
bottom of the image.
30 Operation
to highlight Auto Keystone and press
/ on the projector or remote
to correct keystoning at
to correct
DISPLAY
menu is
to highlight Auto Keystone and
/ to select Off to disable Auto
DISPLAY
menu is highlighted.
to correct keystoning at the top of the
to correct keystoning at the
DISPLAY
/ until the
/ to select Off to disable Auto
/
/ .
Press
/
KEYSTONE
menu is highlighted.
/ .
Press
6
Exit
MENU