Hiding The Image; Setting The Sleep Timer - BenQ W1000 User Manual

Selecting a Film Mode
Highlight Film Mode in the PICTURE: Advanced menu and select by pressing
the projector or remote control.
On is the default and recommended selection for this projector. When Off is selected, the
Film Mode function is not available.
This function is only available when Video or S-Video with NTSC system is selected.
Selecting a 3D Comb Filter
Highlight 3D Comb Filter in the PICTURE: Advanced menu and select by pressing
/ on the projector or remote control.
3D Comb Filer separates the Y and C signals while simultaneously processing three
consecutive horizontal scan lines. While comparing three consecutive horizontal scan lines
within a single video frame, it also analyzes each frame in advance, ensuring the best
possible picture.
On is the default and recommended selection for this projector. When Off is selected, the
3D Comb Filter function is not available.
This function is only available when Video or S-Video with NTSC system is selected.

Hiding the image

In order to draw the audience's full attention to
the presenter, you can use BLANK on the
projector or remote control to hide the screen
image. Press any key on the projector or remote
control to restore the image. The word 'BLANK'
appears at the lower right corner of the screen
while the image is hidden.
You can set the blank time in the
SETUP: Basic > Blank Timer
projector return the image automatically after a
period of time when there is no action taken on
the blank screen.
Blank Timer
No matter
the remote control, or ENTER on the projector to restore the picture.
Do not block the projection lens from projecting as this could cause the blocking object to
become heated and deformed or even cause a fire.

Setting the Sleep Timer

You can set the Sleep Timer interval so the projector powers off after the specified time
period of inactivity (regardless of signal).
Set the sleep timer in the
30 min/1 hr/2 hr/3 hr/4 hr/8 hr/ 12hr.
38 Operation
SYSTEM
menu to let the
is activated or disabled, you can press any key except ENTER on
SYSTEM SETUP: Basic > Sleep Timer
/ on
from among Disable/